FE-FC Holden Discussion Forum

Technical Board => General Technical => Topic started by: dwortho on August 17, 2015, 08:08:03 PM



Title: rear wheel alignment
Post by: dwortho on August 17, 2015, 08:08:03 PM
Hi all

I noticed on my 57' FE ute that the rear passenger wheel was nearer to the arch than the rear driver side (offset about 3/4') i have been told by a friend that this was how they came out the factory
I have looked at the springs and axle and don't see anything wrong is my friend right.

Any assistance on this would be grateful.

Cheers

Dave W


Title: Re: rear wheel alignment
Post by: mcl1959 on August 18, 2015, 07:08:23 PM
If all looks good in the rear and rear springs are not suspect then I would look at the front. Maybe a broken front spring or a mis located front spring.

Ken


Title: Re: rear wheel alignment
Post by: dwortho on August 18, 2015, 10:07:09 PM
Hi Ken

Thanks for that, i didn't think they would come out the factory with a offset.

Cheers

Dave W


Title: Re: rear wheel alignment
Post by: fc4me on August 20, 2015, 08:34:04 AM
hi ive got three fc utes and there all the same as you described but maybe not quite as much as 3/4 of an inch