|
Title: FC Ute rear floor area surprises Post by: cgkspinynorman on March 24, 2015, 08:03:33 PM Hi Guys,
Have got a second owner FC ute been in a shed since 1986 and have just started to pull things apart to get it rolling again. I was going to leave it in patina and perhaps fit a 350 and restore the cab interior to stock and leave the rest (power booster dics up front) basically to look pretty worn out stock). I know I about leaving stuff original but after having just done a poor man rebuild on a 202 at home and that cost me $2k and a shop want $4kish for a grey motor full rebuild... you can get a good 350 for 2-3 K. ANyway what was going to be a quick turnaround looks more serious, I pulled out the Masonite floor to find the petrol tank is rusted out and much of the surrounding floor it attaches to is not good either. So question is here does the ute differ in floor pan sections to a sedan. I will replace rear floor pans and the driver front pan but the pics on the RS site dont help me see what is what. So any pics of what any blokes have done here would be good. I have been told that FC FE EK FB van and wagons used the same tank floor set up and are usually OK as not water seeps in there. But how do you get on of those as it appears nobody makes them and most wrecks are just that ..wrecks that cost 2K. BTW the car has no sill, door, quarter or fender rust at all. Best way forward??? Cheers Spiny Norman PS cant seem to insert any images into this message.... Title: Re: FC Ute rear floor area surprises Post by: mcl1959 on March 24, 2015, 08:22:46 PM You pretty much have all the answers in your question.
Common for Utes to have rust in and around the tank area. Wagon and van rear floors are the same as ute. Not sedan. No replacement sections are made for this area. Yes wrecker vans and wagons are thin on the ground. You can handmake the panels around the tank, there was a ute tank for sale at the last Vic club meeting Just keep looking as wagons for wrecking do occasionally turn up. Ken Title: Re: FC Ute rear floor area surprises Post by: cgkspinynorman on March 24, 2015, 08:54:29 PM So EK FB vans and wagons are the same too?
Cheers Title: Re: FC Ute rear floor area surprises Post by: mcl1959 on March 24, 2015, 09:18:18 PM Yes, FB EK are the same.
Ken Title: Re: FC Ute rear floor area surprises Post by: Dr_Terry on March 24, 2015, 09:18:52 PM Wagon and van rear floors are the same as ute. Not sedan. Ken, where do the sedans differ in their floor pressings, compared to wagons, vans & utes ?Ken Dr Terry Title: Re: FC Ute rear floor area surprises Post by: fcv85l on April 22, 2015, 10:52:48 PM from the shock mounts back
Title: Re: FC Ute rear floor area surprises Post by: mcl1959 on April 23, 2015, 09:09:14 AM Yes when I said the rear floor I meant the area where the tank goes. I see now that this was confusing.
Ken Title: Re: FC Ute rear floor area surprises Post by: FireKraka on April 23, 2015, 02:37:00 PM I've always wondered that Ken because when you look into the back of my FB/EK ute it certainly looks like the pressing in front of the rear shocks has the lip for the rear seat to sit down on to.
Hey Spiny in my ute I'm going to probably delete the spare wheel door and put a commodore tank in so the floor section I will just make to suit I suppose the area comes down to what tank you use as the guys say original tanks can be hard to come by. Looking forward to some pics mate and welcome. Regards Neil H Title: Re: FC Ute rear floor area surprises Post by: cgkspinynorman on April 23, 2015, 04:08:47 PM Hi there,
Yes will post some pics soon. If you have any segments of a tank please let me know. I need RHF floor pan and both rear and will need to to do some fabricating around tank insert. Otherwise all good and of course get a tank.... I think a day at an ol skool wreckers with a tape measure might be next idea. Cheers Spiny |