|
Title: how to fit a boot seal.... Post by: FC 304 wannabe on March 15, 2015, 09:26:38 PM hi everyone.
I have purchased a new boot seal rubber from Rarespares and have no idea how to fit it or even what it is supposed to look like when installed. . can someone point me to some instructions or photos of how to do it please? cheers. shannon. Title: Re: how to fit a boot seal.... Post by: mcl1959 on March 16, 2015, 04:34:31 PM Shannon there are 3 flat sides and a shaped section on the boot rubber. The 3 flats go into the boot channel with the shaped section pointing in towards the boot opening. If the seal is put in with the shaped section pointing out the rubber tends to get trapped between the body and the boot lid.
Ken Title: Re: how to fit a boot seal.... Post by: FC 304 wannabe on March 16, 2015, 10:14:30 PM thanks Ken.
is there any special glue to be used? the rubber didn't come with any.. im just trying to dummy fit the seal so i can see how the boot will sit and i can attempt go get gaps right before paint.... cheers. shannon |