FE-FC Holden Discussion Forum

Hi I have an fe sedan im looking at joing the fe fc car club of qld if there still is 1 as I can find any numbers on the internet thanx alot .

Are you restoring it or is it a driver. You don't need to be a member to start a build page.

Fulling restoring 1 just wanted to join a club so I can get help or take the car to ppl to help me out of I need a hand as in welding and all that as im 32 and this is my 1st old holden resto .

Goggle FE FC Holden Car Clubs, you are sure to find the club details.

John

Yeah ive done that but the 2 numbers I found aint connected for some reason.

Or if anyone is in qld between goldcoast and brisbane that could help out with a resto would be good .

The FE-FC HCC Queensland is still very much a going concern, but I don't think their website gets a lot of love. :P

Anyway, this page ($2) has quite a few different numbers you could try, or alternatively there is the Contact Us ($2) page where you can send them an email.

 Hi  Justin, You can contact the club through our president Ron Cook on 0416775344  or 0733512736  we hold our club meetings on the 1st Wednesday of the month at the Cannon Hills bowls club  cnr Lang & princess sts Cannon Hill at 7pm.    Regards Roy

Hi just wondering if anyone knows of u can put a 5ltr into an fe in either nsw or qld thanx alot I was looking at putting an rb25turbo in it engineer said I can do that but I love the sound of a v8 .

Well I'm putting in a 5L in Nsw ...

Ok cool as I got told u cant in qld as a 253 is the biggest but I already have a 304 given to me and id like to use it . Just wondering if I go that way would u be able to give me some pointers or a hand NES304 thanx alot

Craig (white FC) just did a 5L in QLD too

Ok awesome would u have any contact info for him at all thanx alot .

Hey guys just wondering if anyone has a rear fe seat they wpuld like to sell im only chasing tje botyom part thanx .

Justin , I was just looking through ' Vintage Holden Parts on ebay' and noticed toward the end that a bloke at Wacol is selling FC parts . I bought a few parts of him a while back and he had quite a few FC's in his yard that he was wrecking [that's what he does] so give him a try on the pieces you are looking for .Cheers Haydn

Hey hayden thanx ill try find him . Just putting it out there im chasing an fe chrome blinker surround if any1 knows of any if not ill try find all the fc chrome work and make it an fc thanx

Hi just asking a question has anyone made 253 mounts to fit into fe and if so how hard are they to do thanks alot .

Here's pic http://www.rodshop.com.au/index.php/holden/hk-hr-hg/253-308-5ltr-into-fx-fj-fe-fc-fb-ek-ej-eh-hd-hr-hk-ht-hg-lc-lj-lh-lx-uc.html
http://m.ebay.com.au/itm/FX-FJ-FE-FC-FB-EK-HOLDEN-V8-ENGINE-MOUNTS-308-304-253-5LTR-CRS-ROD-SHOP
-/161463013880
https://www.rarespares.net.au/rarespares/ProductPage.aspx?product=EM1000A

Did u know that the 308 is same. There's been recent builds that are in completed section to get ideas from.

http://forum.fefcholden.club/index.php?topic=15344.640

Hi just wondering if anyone has pictures of engine mounts for an rb into fe at all thanx been looking and haven't found any yet also gearbox mount or would that be an easy make. Thanx alot

Hey Justin;
Mate speak to Pete Mallaby Pete has a RB30 I believe in his sedan he may be able to help

Regards
Neil H

Ok no worries im in qld as just trying to plan my build

Pedro and Jox, also.  :)

G'day Justin,

My engine mounts for the RB30 motor came from Castlemaine Rod Shop - bolted straight up and came certified for engineering. I was already running a red motor, so the mounts on the front end had been moved back. 

I used the RB30 gearbox mount and had a mate weld up some additional bits - was fairly simple but very solid and works well.

You could probably get all you need - engine mounts, gearbox cross member, etc from CRS or similar places.  The most important thing before you buy anything is have a well documented and thought out plan and stick to it.  Some of this stuff can be very costly and once you start cutting things up, there is no turning back........

But it is all good fun and very rewarding when finished  ;D

Good luck with your build,
Cheers, Graeme (JOX515)

Thanx mate my mounts have alr3ady been moved back and welded into place was just seeing how the engine mount bolts onto the cross member thats all thanx.