FE-FC Holden Discussion Forum

General => General Board => Topic started by: Oldfart on September 10, 2014, 09:28:26 AM



Title: Engine bay paint?
Post by: Oldfart on September 10, 2014, 09:28:26 AM
Back in the olden days when I was working on cars I have a vague memory of the engine bay colour (Apart from the firewall) was black on older Holden's like HR's and FC's. I'm helping a friend with some work on an FC and the paint inside the engine bay is the same colour as the lighter colour of the two tone.
So Black or colour?


Title: Re: Engine bay paint?
Post by: FireKraka on September 10, 2014, 10:09:54 AM
Hi Oldfart
As far as I am aware the engine bay should be black but others with more knowledge may be able to clarify this.

Regards
Neil H 


Title: Re: Engine bay paint?
Post by: JOX515 on September 10, 2014, 10:34:00 AM
G'day Oldfart,

Have a look at this thread - it may help.

Engine bay paint colour ($2)

Cheers, Graeme


Title: Re: Engine bay paint?
Post by: Oldfart on September 10, 2014, 05:26:20 PM
Thanks for that, it didn't look right being light blue.


Title: Re: Engine bay paint?
Post by: mcl1959 on September 10, 2014, 06:48:25 PM
The response to that link was for late 59 FC's. early FC's did have body colour firewall and skirts. There are a number of different paint combinations of firewall and skirts through the FE FC range. Late FC was when GMH finally decided on black firewall and skirts for the next couple of decades.

Ken


Title: Re: Engine bay paint?
Post by: Stewy on September 10, 2014, 07:21:51 PM
58 FC we have is light colour firewall. Adelaide built.
I still like FErgus firewall
 
(http://s11.postimg.org/dy6jc7nlb/fergus_firewall.jpg) ($2)

Teal Blue over Breton Blue. 57 FE wagon Adelaide built.

Cheers Stewy   8)


Title: Re: Engine bay paint?
Post by: Oldfart on September 10, 2014, 09:08:01 PM
What about the aluminium tag on the firewall, was it painted the body colour as well? It doesn't look right to me but the paint looks to be original. The subframes are painted body colour back to where they bolt underneath onto the body. I'll chase up the body number to see when it was produced.


Title: Re: Engine bay paint?
Post by: DJ on September 10, 2014, 10:17:48 PM
Mine has black firewall & same over the plate.

BODY:   FC 225-31880-S
TRIM:   274-842
PAINT:    256 - 2100
INSERT:   253 - 5775

Not real sure on the date now.
If it's the original black it would seem to indicate 'late' 59 Sydney model.
Some old handwritten notes say -
Two tone interior code 842.  Factory build/paint from end 1958 to May 1959.

(http://i1276.photobucket.com/albums/y472/davidbolton1/000_0022_zps5ab5eb89.jpg) ($2)


Title: Re: Engine bay paint?
Post by: Stewy on September 10, 2014, 10:29:06 PM
The 59 FC wagon that I wrecked was a black firewall and tag.

(http://s18.postimg.org/vyyaljv0l/402.jpg) ($2)

FE plate blurry but original.

Cheers Stewy   8)


Title: Re: Engine bay paint?
Post by: Oldfart on September 10, 2014, 11:18:41 PM
Bewdy, thanks fella's.