FE-FC Holden Discussion Forum

Technical Board => Restoration Help => Topic started by: mike on June 22, 2003, 06:35:48 AM



Title: Door pull handles
Post by: mike on June 22, 2003, 06:35:48 AM
today I got hold of two sets of door pull handles and they are exactly the same, except one set has
PIC - D 002 on the back of them whereas the oter set has nothing, my question is which is the correct set to use,

regards mike


Title: Re: Door pull handles
Post by: slim on June 22, 2003, 08:08:15 AM
The ones with the numbers inside  are the ones Iv been lead to believe are the NASCO ones, But unless your going to look at the inside of your door handles I personally think either set are quite alrite . The perfectionist will no doubt argue with me on that one !


Title: Re: Door pull handles
Post by: mcl1959 on June 22, 2003, 10:08:44 AM
Hard to say Mike- the peculiar thing is that I have seen both types on original cars and here is my conclusion.
There are 2 different part numbers for the handles;
7407430 is original equipment of business sedan
7406810 is the accessory for all other cars.
Maybe one has the writing & the other doesn't !!!

Ken


Title: Re: Door pull handles
Post by: mike on June 24, 2003, 02:07:33 AM
Thanks Ken and Slim,

Regards mike.