|
Title: Seatbelt Post by: xwolfkvltx on July 02, 2014, 10:32:29 PM Hi Guys, what does everybody usually do with seatbelts in fc's, has to be able to pass engineer inspection. Thanks in advance
Title: Seatbelt Post by: NES304 on July 03, 2014, 09:42:52 AM My engineer wants a unf nut welded to a 3mm plate 75mm x 45mm. Larger if two points going to it (100mm x 100mm) and then stitch welded or plug welded to the body.
Check with YOUR engineer first. Some interpret the rules differently. Here's the big one (http://img.tapatalk.com/d/14/07/03/6yjy3a2u.jpg) Title: Seatbelt Post by: NES304 on July 03, 2014, 05:28:26 PM There may be an easier way to slip em into the pillar though...
Some guru here might put some good guts info up |