|
Title: HQ to WB front doors Post by: brett_f on May 04, 2014, 08:08:30 PM Hi guys, Have a mate that is looking for good HQ to WB lh and rh front doors. No rust or dents. Can be bare. In Melbourne.
Title: Re: HQ to WB front doors Post by: john253a on May 04, 2014, 08:18:21 PM what front guards and rear section does he have
because they all bolt up the same BUT the factory curved crease above the fold line is different, and something he may wise to consider, unless he planes to rework the panel and remove it as many other do to active a perfect flat panel Title: Re: HQ to WB front doors Post by: brett_f on May 04, 2014, 08:53:49 PM Hi John, I may be wrong but i believe they are all the same. I know the moulds are different. The vehicle is a HZ station wagon with standard guards.
Brett Title: Re: HQ to WB front doors Post by: fcwrangler on May 04, 2014, 10:15:09 PM Not sure about the actual shape of the doors, but the HQ takes a different door glass to the rest. It has a small filler piece at the joint of the door and upper frame at the front of the door so the glass is cut off flat.
Jim Title: Re: HQ to WB front doors Post by: fcwrangler on May 04, 2014, 10:18:18 PM Just read your reply, if it is a HZ then you will need HJ on doors.
Jim Title: Re: HQ to WB front doors Post by: brett_f on May 04, 2014, 10:30:27 PM Thanks guys, so HJ onwards doors are required.
Brett Title: Re: HQ to WB front doors Post by: fe2ek on May 20, 2014, 06:07:06 PM Being picky, I think some older ones don't have the intrusion bars but could be wrong. Pretty sure commercials of that vintage didn't.
|