FE-FC Holden Discussion Forum

For Sale and Wanted => Parts Wanted => Topic started by: EJ208 on September 11, 2013, 09:13:58 PM



Title: FC Diff
Post by: EJ208 on September 11, 2013, 09:13:58 PM
Hey guys,

I am currently building an early model Holden group Nb race car and I am looking for a few parts without buying whole vehicles. Specifically I am chasing an FC diff drum to drum with a 3.9:1 centre. I am located in Brisbane. any information or leads on parts greatly appreciated.

My contact details are 0438 643 412 or rhys.ward@santos.com

Thanks,

Rhys


Title: Re: FC Diff
Post by: colt on September 12, 2013, 04:36:55 PM
Rhys, if you need the whole housing I cant help you, however I have several 3.89 grey centres here. A lot of the guys go for 4cyl Torana or Sunbird centres which are 3.9 ratio but take the later style 6cyl uni joints. It is as simple as changing the rear uni joint. I don't know if I would use the original bolt up job. By going Nb you should be able to change this without having eligibility hassles.

Colin.

BTW, I'm in Canberra. You should be able to find a diff up there?