FE-FC Holden Discussion Forum

Technical Board => General Technical => Topic started by: jimbo492 on May 07, 2013, 03:39:49 PM



Title: oil pump gears
Post by: jimbo492 on May 07, 2013, 03:39:49 PM
anyone know where to obtain oil pump gears? regards jimbo492


Title: Re: oil pump gears
Post by: Trevor_B on May 07, 2013, 06:07:43 PM
Hi Jimbo,
Grey Oil pump gears are scarce, we did have a couple of sets at last year's VIC Club Auction that went for close to $100 each.

A guy from the FB-EK Club in NSW has tried retro fitting red motor oil pump gears into a grey pump - it is possible with minor machining....

One of the guys in the VIC & Wangaratta Clubs (he drives a yellow FE Panel Van  ;)) is currently attempting this modification but is yet to complete a unit. He has done the machining and yes, the gears can be installed by machining down the shafts. He is investigating the relief valves and will then bench test to check pressures etc. When he has done the testing he will advise how it is done.

Let me know by PM if you want a copy of the "instruction" on how to modify the oil pump to suit the red motor gears if you want to try it yourself.

Cheers,
Trevor_B


Title: Re: oil pump gears
Post by: jimbo492 on May 08, 2013, 07:32:26 AM
I would like the instructions  , thanks for your help. regards jim


Title: Re: oil pump gears
Post by: Trevor_B on May 08, 2013, 12:13:00 PM
Hi Jim,
email sent  :)

Cheers,
Trevor_B


Title: Re: oil pump gears
Post by: jimbo492 on May 09, 2013, 07:44:49 AM
trevor B, received info thanks very much, regards jim


Title: Re: oil pump gears
Post by: KFH on May 09, 2013, 05:54:41 PM
KFH received the info also.  Thanks

Keith


Title: Re: oil pump gears
Post by: newman on May 09, 2013, 09:58:52 PM

Good on you Trev for the email, made very good reading ;)

Mick 8)