|
Title: new front windscreen Post by: GMHwagoon on March 29, 2013, 07:28:39 PM gday
lm in melbourne can anyone tell me where l can get a new front windscreen for my fc thanks greg Title: Re: new front windscreen Post by: Bob_FC_Ute on April 14, 2013, 10:08:06 AM Holden FC-FE 4DR Sed/Wag/Ute/Van Front Windscreen
This is on Ebay - Musclecarpartsaus for $195 New They have quite a range of parts for lots of different makes & models Regards Bob Title: Re: new front windscreen Post by: GMHwagoon on April 14, 2013, 12:49:03 PM thanks bob
Title: Re: new front windscreen Post by: Stewy on April 14, 2013, 12:55:53 PM Title: Re: new front windscreen Post by: geebeefc on April 16, 2013, 09:40:27 PM I got a new laminated screen with a tint from Novus, no problems. Wasnt a lot of coin, either! Cheers, Glenn
Title: Re: new front windscreen Post by: NES304 on April 17, 2013, 09:20:11 PM Is it possible to buy new door glass with no metal attached to the bottom? ::)
Cheers Title: Re: new front windscreen Post by: FCRB26 on April 17, 2013, 09:32:08 PM Yes i can cut it but it needs to be toughened and has to be stamped to say its legal.
Ill ask chop shop they are getting ek glass done in sydney. Title: Re: new front windscreen Post by: JOX515 on April 17, 2013, 09:37:58 PM Nes, I got my local Windscreens Obrien bloke to cut me up the proper glass - fairly cheap too.
Title: Re: new front windscreen Post by: FC427 on April 18, 2013, 08:13:10 AM I have had laminated tinted and clear [slight tint because of the bonding material between the sheets of ]'' FLAT ''glass cut for a few cars over the years only thing it was 1.2 mm thicker than the original safety glass but went in the Bailey OK ......FC427........
Title: Re: new front windscreen Post by: fcwrangler on April 18, 2013, 07:14:08 PM Nes, Flat glass industries at Moorebank can cut any size you need, they do the toughening process and put the as stamps on the glass as well. All you need to do is supply a cardborad or ply template and tell them where you want the stamp and they do the rest.
Regards Jim Title: Re: new front windscreen Post by: FCRB26 on April 18, 2013, 08:05:04 PM Your all over it Jim.. ;D
I only give half an answer.. Pete Title: Re: new front windscreen Post by: Maco on April 18, 2013, 08:14:35 PM Hi Pete,
Can you supply the bottom glass metal channel assembly? Cheers John Title: Re: new front windscreen Post by: FCRB26 on April 18, 2013, 09:13:23 PM Ill have a look tommorow arvo if i can get the folds.
Title: Re: new front windscreen Post by: NES304 on April 18, 2013, 10:02:53 PM Ill have a look tommorow arvo if i can get the folds. When are you releasing your supply book??? Title: Re: new front windscreen Post by: FCRB26 on April 19, 2013, 04:11:06 AM Between 2 nocturnal kids under 3 and a moody 10yr old and building 2 cars and work ill get there.
Good job for secetarys next week. Pete Title: Re: new front windscreen Post by: NES304 on April 19, 2013, 09:16:33 AM Between 2 nocturnal kids under 3 and a moody 10yr old and building 2 cars and work ill get there. AmenGood job for secetarys next week. Pete |