FE-FC Holden Discussion Forum

For Sale and Wanted => Cars For Sale => Topic started by: collecta on February 06, 2013, 10:33:33 PM



Title: FC panelvan project
Post by: collecta on February 06, 2013, 10:33:33 PM
 Hi, its time to sell to make room for some new arrivals ;D. For sale is an adobe beige FC panelvan with hearse style window openings, this is a project/resto that i had blasted and etched but it is surface rusting again, but nothing is hidden better than alot of cars members start with.. Almost complete but in pieces. Could be assembled to make a roller for trailering with a bit of effort. Floors are solid, fronts have been repaired very nicely but has been cut out for larger trans hump, around petrol tank is rust free. Has good y frames requiring small repairs around the front areas, sills- inner are excellent, outers need patch repairs only , and the front of the a pillars most areas of rust were cut out ready for patch panels, honestly there is not alot to do. Right rear tail light section must have suffered a knock and had been cut out ready for repair i have sourced the required repair panel. spare wheel door has been deleted but behind the blanking peice looks all stock and in good condition would not be hard to change back to original. comes with doors, guards almost rust free bit wavey nasco guard mirror,grille, lucas headlight buckets, headlamp surrounds,complete indicators, bonnet, bumperettes suit reco, possibly a front bar, electric wiper set up, good pair of tail lights (clear lense) upper and lower tailgates lower will need some rust repairs has badge and handle, dash and gauges missing switches, good speaker grille and radio blank, glovebox lid and hinges, no inner, cowl vent, steering column standard front end which has good king pins complete diff and springs out of a sedan i was going for a softer ride and a complete wiring loom. no interior. Comes with choice of grey motor running but fumey and standard 3 speed or 186 and trimatic all depends if you want to build a standard van or modified. Only have shots of the shell so far, plan is to try and throw it together as a roller for some pics see how time goes. If you are interested ring and have a chat not really interested in txts and emails. looking at $4000 for the lot.

cheers
Scott
0415324385
(http://s18.postimage.org/h03nc84f9/004.jpg) ($2)

(http://s9.postimage.org/ldqhqdtbf/002.jpg) ($2)

(http://s9.postimage.org/5tj3zuj6z/003.jpg) ($2)


Title: Re: FC panelvan project
Post by: DagsFC on February 27, 2013, 07:05:10 PM
Hey Scott

Have you had any luck with this??

Darren


Title: Re: FC panelvan project
Post by: collecta on February 28, 2013, 12:11:11 AM
 Hey Darren,
 not alot of interest.  Not to bothered though i will throw it together then try ebay, no real hurry just running out of space for the new ones.
 cheers
 Scott


Title: Re: FC panelvan project
Post by: DagsFC on March 07, 2013, 10:16:40 PM
Looks like a great project! If only I had the cash in my pocket :(   


Title: Re: FC panelvan project
Post by: collecta on March 08, 2013, 04:46:38 PM
 sold sold sold  ;D