FE-FC Holden Discussion Forum

today i am going to post  some photos of my Fe special will be posting some numbers so i can work out what colour she was when she was new i think burgundy body white roof interior the same colors i think 57 model very stock engine might not be the stock grey maybe out  of ej holden i have some parts for sale dragway mags and rear wind spliters photos here as well




body identification
no.fe225-30782-703
trim no.245-703
paint no.207-7457
rpo2567698


engine we are not sure about the numbers on the motor but we have some information


7408858
sc109?
s0109?
sc108?
0109?

engine stamp-6 ;D :) :)  

Try http://www.fefcholden.org.au/techinfo/idplate.html
Paint; http://www.fefcholden.org.au/techinfo/gmhpaintcodes.html

Can Tell you Its an FE Special but you can do the rest with those above

thanks alot i'll look at it

photos soon









angel 57

http://s1280.beta.photobucket.com/user/MIWRicky/library/FE%20Holden?

This is the link to the FE Holden pictures. Please tell me if it works or not.






Angel57

Hi angel57, yes the link works.

If you want to show the pix directly on the site here, open up photobucket in another window. Copy the IMG link at the bottom right when you're viewing a single image, and paste it into a message here. It will look like this:


... and behave like this:

(http://i1280.photobucket.com/albums/a499/MIWRicky/FE%20Holden/IMG_1923.jpg)

Looks like a nice project you've got there. Best of luck with it.

cheers
RET

nice looking car, your number tell it to be castle grey over etna maroon with fall red & parchment ivory trim.
I also noticed in the photos you have taken the centres out of the dragways. I am trying to do the same with no luck, what is the secret?
Regards Jim

hi jim the dragway mags centers i bought a while a ago because one the mags did not have drageway stamps i think some people call them spalts  yes they are a tight fit   i think maybe a mag shop could help out  i thought the fe was a maroon colour body from factory white roof it might have had a colour change at some time the mags centers you can have for 10 each you might use them thanks  jason ::)

Hi Angel - my first FE was the same colour.

re the body number FE 225 30782   -  there should be a letter such as  A or S or M after it not 703.
Can you check to see please
If it is as you say I would like a pic because it is unusual

Engine number is on a machined plate just forward of the distributor locking bolt
Chassis number is on the drivers side skirt in the engine bay about half way along - yours probably starts with 7 or 8

Ken

Hi Ken,

My name is Jason, I took some more photos for you to look at. They aren't the best but they are something. The link is:

 http://s1280.beta.photobucket.com/user/MIWRicky/library/FE%20Holden?

Fe Holden's are great. I've owned this car for about 5 years. I like how it is very original, untouched. A true survivor from a past generation. Looking forward to many generations to come.  :)

Angel 57

Jason, just had a closer look at the photos, as Ken said, the engine number is on the face plate just in front of the distributer. This number with all your other info will give you the details. I also noticed the photo of the yellow wax marker in the engine bay, they are the colours of the car. You need to enter you details at the start under the map is the tech. info section as I said before, click on that and then go to decode your id tag. You need to put in all the info you have from the photos as described and it will give you want. Again your chassis number ends with A which means it's an Adelaide car.
Hope all this helps, Jim

thanks a lot  you all have been very helpfull i will check out that site

Hi and welcome Jason,
You have come to the right place for info on a great Forum.
My FE station sedan has the colours written on the firewall as well as shown in the picture below


(http://s13.postimage.org/9vvsyy5r7/P8261095.jpg) ($2)

The colours of my wagon are "Teal" blue (roof)
over "Breton" blue (body)
As Jim has described. yours should read "Castle" and "Etna"

Ask as many questions as you like.

Cheers Stewy   8)

Just had a better look at the photos - I think chassis number is 7-11821-B which means a 1957 sedan with body made in Adelaide and assembled in Brisbane. My Etna Maroon and Castle Grey car also had the FC tail fins - quite a few FE's were fitted with them by dealers

Ken

 thanks all you guys who have help me  i have learnt so much in a short time   its all make sense know angel 57

Jason, I'll take you up on the mag centers, can you find out how much it would be to send them up to Bargo NSW 2574. You can call me on 0419632935.
Thanks, Jim