|
Title: Backing boards. Post by: fink fc on July 27, 2012, 09:54:01 PM Does anyone know where i can get front fc special BackingBoards,i've had my van 20yrs next year so i'd like to finally finish the interior ;Dthanks,Gaz! :P
Title: Re: Backing boards. Post by: FC427 on July 27, 2012, 10:06:46 PM I bought a set for my Ute a few weeks back of ebay, Betta Rubber I think .......FC427......
Title: Re: Backing boards. Post by: Stewy on July 27, 2012, 10:09:59 PM Title: Re: Backing boards. Post by: fink fc on July 27, 2012, 10:31:20 PM Front door trim backing boards,Stewy i always referred to those in the pic,as[kick-panels]
FC 427,thanks but they only have rears at BETTA! Title: Re: Backing boards. Post by: Stewy on July 27, 2012, 10:54:46 PM I know that Stinky has them or can get.
http://fefcholden.org.au/forum/index.php/topic,18001.msg108631.html#msg108631 Title: Re: Backing boards. Post by: black57 on July 28, 2012, 07:36:47 AM http://www.ebay.com.au/itm/Front-Door-Trim-Backing-Board-FE-FC-Holden-/300746198573?pt=AU_Car_Parts_Accessories&hash=item4605dece2d
Commonly know as door trims or door cards. I just made my own for mine. Cost $10 for enough board to do front and rear and about an hours work. My brother-in-law is a trimmer so he gave me a hand recovering them. Pinky. Title: Re: Backing boards. Post by: black57 on July 28, 2012, 07:38:10 AM Those ones on evilbay have all the correct holes for both FE & FC moldings too.
Pinky. Title: Re: Backing boards. Post by: Glenn 'Stinky' Stankevicius on July 29, 2012, 10:09:12 AM http://www.ebay.com.au/itm/Front-Door-Trim-Backing-Board-FE-FC-Holden-/300746198573?pt=AU_Car_Parts_Accessories&hash=item4605dece2d Commonly know as door trims or door cards. I just made my own for mine. Cost $10 for enough board to do front and rear and about an hours work. My brother-in-law is a trimmer so he gave me a hand recovering them. Pinky. Personally I hate the Masonite they use for these ones on ebay, especially for the fronts as they are brittle and do not bend easily. If you are keen you can grab the original sytle card from www.daleys.com.au and cut them yourself (sharp knife and various hole punches required). I do sell them, but I am so backed up with work right now it's a few weeks wait. Title: Re: Backing boards. Post by: fink fc on July 29, 2012, 10:57:45 AM Personally I hate the Masonite they use for these ones on ebay, especially for the fronts as they are brittle and do not bend easily. Pinky,thanks for letting me know how lucky you are,lol !If you are keen you can grab the original sytle card from www.daleys.com.au and cut them yourself (sharp knife and various hole punches required). I do sell them, but I am so backed up with work right now it's a few weeks wait. Stinky,there boards are black if i remember,i know there stuff is expensive but if it's a car we intend to keep ,then we should use the best product,true! Title: Re: Backing boards. Post by: black57 on July 29, 2012, 11:53:31 AM Thanks for the link Stinky. I'll use them for the windlace (shame they don't have magenta). The board I used was OK, but theres would probably be better. I think I'll use their board for the FC retrim.
Finc if you mean lucky having a Bro n law that's a trimmer....you're right! He was a furniture upholsterer for over 15 years and got into trimming cars about 3 years ago. He only has experience doing custom stuff, so he is kind of cutting his 'old school' teeth on mine. But if his custom stuff is any indication of his finish quality, my trim is going to be fantastic. Pinky. Title: Re: Backing boards. Post by: Glenn 'Stinky' Stankevicius on July 29, 2012, 05:41:06 PM I'll use them for the windlace (shame they don't have magenta). You can get windlace custom made if you can find the right vinyl/material. Daleys and Clark Rubber sell the profile that goes inside, just a matter or getting it stitched up, Title: Re: Backing boards. Post by: black57 on July 29, 2012, 09:49:48 PM Oooo...that's good to know. Thanks again Stinky.
Pinky. |