|
Title: steering coloum Post by: aussieute on July 22, 2012, 01:33:48 PM hi all does anybody know of a coloum that will suit a front mount rack i have a standard modified fc in it but is to far from dash i was thinking vl commodore any tips thanks john
Title: Re: steering coloum Post by: NES304 on July 22, 2012, 02:14:18 PM did you want to keep column shift?
Title: Re: steering coloum Post by: mcl1959 on July 22, 2012, 09:57:13 PM Tirana is often used
Ken Title: Re: steering column Post by: aussieute on July 23, 2012, 03:06:58 PM hi thanks no i dont need shifter on column as i have floor shift just need to get wheel away from big gut and the shaft keeps poping out of joint where bolt goes thru very scary steering wheel spinning so i am tossing steering to try some other way
Title: Re: steering coloum Post by: weddo on July 23, 2012, 09:11:23 PM You can always shorten the column you have.
Cut down outer tube, shorten the shaft and have it re splined and thread re cut. I've had mine shortened 3 inches including gear change tube. regards Weddo Title: Re: steering coloum Post by: FCRB26 on July 24, 2012, 05:12:05 AM I shortened mine and you are allready running a rack so do it on the bottom side have it machined to accept your uni and just cut your tube down.
I assume you have a nylon bush in the bottom of the colum allready so remove it and shorten it up from there. Pete Title: Re: steering coloum Post by: aussieute on July 24, 2012, 10:13:24 AM thanks for the ideas will do that
|