|
Title: unmodified fe/fc wiring looms complete Post by: collecta on June 07, 2012, 11:19:13 PM HI,
chasing standard wiring looms for FE/FC. Must be complete and unmodified and been removed with care. There must be a few lying around with all these modifieds being built, have a couple of projects requiring them. cheers Scott Title: Re: unmodified fe/fc wiring looms complete Post by: mcl1959 on June 08, 2012, 10:20:03 PM I have a couple of looms - From memory a couple of ends may be missing like coil connector or starter motor connector - things like that. Otherwise original unmodified looms.
Ken Title: Re: unmodified fe/fc wiring looms complete Post by: john253a on June 08, 2012, 11:10:25 PM its very easy to make a new one from scratch if you want,
i replaced mine with all the original colours, got it all from bursons for just under 150 trade, i did the entire car except from headlights to joiners in engine bay, as i dont have new joiner plates yet, took me about 2 week on/off after work, but could be easly done in a 2 full day weekend Title: Re: unmodified fe/fc wiring looms complete Post by: collecta on June 18, 2012, 07:54:23 PM Still looking.
Ken what where you chasing for your looms. Title: Re: unmodified fe/fc wiring looms complete Post by: mcl1959 on June 18, 2012, 09:07:47 PM Sorry I got sidetracked I have 2 pretty good looms here plus about 6 more in fair condition - how's $20 for the 2? - as is said the odd end has been broken off and will need to be replaced with a new one or I unwind the tape and replace the broken ends with wires from other looms - I will throw in another loom for spare wires if you want it.
Ken Title: Re: unmodified fe/fc wiring looms complete Post by: collecta on June 19, 2012, 12:38:45 AM Done. Thanks Ken
cheers Scott |