FE-FC Holden Discussion Forum

For Sale and Wanted => Parts Wanted => Topic started by: samprinci2 on May 25, 2012, 01:46:59 PM



Title: 2 speed Preslite Wiper & Washer
Post by: samprinci2 on May 25, 2012, 01:46:59 PM
Hi all,

if anyone has or knows of one , 2 speed Preslite Wiper & Washer .. please let me know.

After all the testing for the new Nylon & suction cup, the Main Shaft & Assembly gear has packed it in??? DOH!!!

thanks all.
Sam

m: 0438 060 821
e: ej.cruzin@gmail.com


Title: Re: 2 speed Preslite Wiper & Washer
Post by: fcwrangler on May 29, 2012, 10:27:24 PM
Sam, have you thought about doing the vn/vp wiper swap, you can pick them up anywhere and the conversion is fairly straight forward.
Regards Jim


Title: Re: 2 speed Preslite Wiper & Washer
Post by: samprinci2 on June 05, 2012, 10:06:28 PM
Hey Jim,
sorry for late reply... ha???? no not heard of that ???


Title: Re: 2 speed Preslite Wiper & Washer
Post by: Billy Blackarrow on June 06, 2012, 10:04:12 AM
I have just finished doing it on my FB vn wiper motor $40 switch $39 I did how ever have to use EK wiper arms as FB hit on the heater vents the EK are about 3mm longer than FB and they have a cut out on the ends to miss the heater vent was as simple as  I made a new base plate out of 5mm plate just because I wanted to Check out the post by brett_f --Injected V8 FC brett is very helpful  


Title: Re: 2 speed Preslite Wiper & Washer
Post by: samprinci2 on June 06, 2012, 11:04:47 AM
hey Billy,
thanks for that. but Im actually trying to fix my  Ej Prem Preslite 2 speed wiper washer. My wiper, currently the Nylon gear has been stripped. & it looks to me that the same gear was used in the standard Preslite 2  & single speed wiper ???

that way I can fix my original wiper washer ??????

well he's hoping ??


Title: Re: 2 speed Preslite Wiper & Washer
Post by: Billy Blackarrow on June 06, 2012, 12:02:13 PM
I think you may find that  Preslite used the same gear in a lot of there motors :) :)


Title: Re: 2 speed Preslite Wiper & Washer
Post by: samprinci2 on June 06, 2012, 01:32:14 PM
Yer that's what I'm hoping???