|
Title: shorten a power steering rack??? Post by: NES304 on February 29, 2012, 10:21:47 AM I was told you can't shorten a power steer rack to use in an FC. Was told by a local bloke you can now. Confused as hell. Has it been mastered now? I have a VT power steer rack sitting here and would like to use it.
One of the EH boys used a Barina set up, don't know how effective though. http://forum.ejehclubqld.com/ehclub/forum/topic.asp?TOPIC_ID=7664&whichpage=2 Thoughts? (yes i saw the topic with Ken from 2002) Title: Re: shorten a power steering rack??? Post by: JB on February 29, 2012, 03:32:40 PM I am using a VS power steering rack with shortened ends...
JB Title: Re: shorten a power steering rack??? Post by: FCRB26 on February 29, 2012, 03:44:50 PM JB thats on a pat gardener front end the pivot points are different for a hr front end otherwise using a stock width VS rack (in the centre) you will get bump steer..
Title: Re: shorten a power steering rack??? Post by: JB on February 29, 2012, 04:57:24 PM Yep true, something I haven't ever stuffed with, just trusted the guys that are meant to know... Got burnt the first time in Castlemaine, so went to V6conversions the second time.
JB Title: Re: shorten a power steering rack??? Post by: waynos on March 07, 2012, 12:14:04 AM just chop em and weld it with a tig using moly rod
Title: Re: shorten a power steering rack??? Post by: waynos on March 07, 2012, 12:18:40 AM sorry maybe ya talkin about the splines???????????
Title: Re: shorten a power steering rack??? Post by: NES304 on March 07, 2012, 08:47:23 AM Going to put in a manual steer rack, from what I have heard power steer is over the top for the weight of an FC.
Just have to find one in good nick that doesn't cost the earth.....(dam financial officer!) And I will patiently wait for the right one if I have too. Title: Re: shorten a power steering rack??? Post by: NES304 on March 07, 2012, 11:04:57 AM Actually a mate suggested using a manual barina or astra rack. Any one know if these would be a suitable steering option rather than paying someone 500 big ones to shorten one?
Title: Re: shorten a power steering rack??? Post by: FireKraka on March 07, 2012, 02:49:05 PM nes138 talk to Pat at V6 conversions his manual racks are good units and I don't think they cost the earth (been a while since I bought mine true :-\)
Everyone I have read on here that talks about Pats units says that you get the best turning circle etc. Just thought I would stick my 2 bobs worth in ;D Regards Neil Title: Re: shorten a power steering rack??? Post by: NES304 on March 09, 2012, 09:31:07 PM I have tried Pat Gardner and can't get a reply via phone or email.
I think the bloke is under water or something. Any way I have decided a manual steer rack from early commodore and have found a bloke here that will shorten. Cheers Title: Re: shorten a power steering rack??? Post by: FireKraka on March 12, 2012, 03:19:34 PM NES the V6 conversion racks are also early commodore I can't remember I think VB or VH so you are on the right track.
I had also found Pat a little hard to get a hold of but I left a message and eventually he got back to me. Good Luck Neil Title: Re: shorten a power steering rack??? Post by: waynos on March 12, 2012, 07:38:11 PM my mate fb steve(with an ek)haha,
got his rack shortened for power steer (chopped em got welder round the corner to tig em up with chromoly rod) .i wondered why ? cause mine is so easy to turn with same rack, but i got standard steering wheel with 205/70/14s. he's runnin small steering wheel with commo 17s, with wide tyres (not sure). im just saying be careful if ya runnin stockish wheels hey. it could be too light has anyone had these issues??? Title: Re: shorten a power steering rack??? Post by: NES304 on March 14, 2012, 12:27:52 PM Stock 15's from commodore going on. Defnately using manual rack.
Eventually want to run B45 simmons 15's commodore stud pattern (if anyone has em cheap) but rims will be after money for engine conversion...... |