FE-FC Holden Discussion Forum

Technical Board => General Technical => Topic started by: graham_fuller on February 01, 2012, 08:46:20 PM



Title: FJ Horn button removal
Post by: graham_fuller on February 01, 2012, 08:46:20 PM
Does anyone know how the FJ horn button is removed from the wheel?
Cheers,
Graham


Title: Re: FJ Horn button removal
Post by: mcl1959 on February 01, 2012, 08:57:11 PM
The scientific publications manual says it is prised up same as FE FC

Ken


Title: Re: FJ Horn button removal
Post by: BAZZA on February 01, 2012, 09:04:54 PM
It has metal tabs all the way around that hold it into the wheel. So like Ken said prise it off.
Two small screwdrivers on opposite sides, but use some thin rubber to protect the wheel rim
as they can be fragile in this area, also helps to protect the paint.
Bazza


Title: Re: FJ Horn button removal
Post by: graham_fuller on February 02, 2012, 08:05:23 AM
Thanks guys, horn button off without damage.
Cheers,
Graham


Title: Re: FJ Horn button removal
Post by: ardiesse on February 02, 2012, 04:15:18 PM
Graham,

I didn't know the Fuller household had an FJ . . .

Rob


Title: Re: FJ Horn button removal
Post by: customFC on February 02, 2012, 08:56:34 PM
Retromod for the FE.
Regards
Alex


Title: Re: FJ Horn button removal
Post by: graham_fuller on February 02, 2012, 11:37:34 PM
Hi it doesn't just a steering column with steering lock, wheel and horn button. Just wanted the horn button.
Cheers,
Graham


Title: Re: FJ Horn button removal
Post by: graham_fuller on February 03, 2012, 10:31:45 PM
Hey Rob,
You don't know where i can get a 48 Grille badge do you?
Cheers,
Graham


Title: Re: FJ Horn button removal
Post by: zulu on February 11, 2012, 12:16:57 AM

Graham, there is a very reasonable one on ebay at the moment, although there are a few other items with it

http://www.ebay.com.au/itm/FX-FJ-48-215-HOLDEN-NASCO-/140696815140?pt=AU_Car_Parts_Accessories&hash=item20c22f0624

Cheers, Gary


Title: Re: FJ Horn button removal
Post by: graham_fuller on February 11, 2012, 12:46:07 PM
Thanks Gary. Made an offer.
Cheers,
Graham