FE-FC Holden Discussion Forum

Wrecking fc special sedan . Most parts available.. CAR NOT REPAIRABLE AT ALL..Unless your Merlin the  mAgician... If theres something you need for your fc special sedan  , Try me out i just might have it . Has 13 inch Anson/Us racer type wheels on it . Need a  real good polish but cheap.... Worked motor and gearbox with floor shift still in vehicle . Head being sold seperately  , Has Extractors also... Original Hoodlining. All glass, Flipper windows, wind Screen Chrome moulds F & R, , Great for nuts and bolts and clips and springs for the restorer.. Has Lucas headlights ,, Car located in sydney , Liverpool , Can post parts AUSTRALIA Wide at buyers cost. Or come have a look and see if theres anything you need. But its a wrecker only....... Slim 0401303998

Hi is sub frame worth a look and grey or red motor.
Ta
John

Wat subframe...you mean the rust frame  ;D ;D, and its a worked grey mate,

Does it have the chrome front bar still?

that was the first thing to go mate , sorry. ::)

G,day,Slim,do you have rear chrome external 1/4 panel strips?And what about tail light surrounds,chrome,good luck with your lot,Bob.

Hey Slim
How much for the motor?? Is it running???
Nick

Bob , taillights still in the car , And in good condition , just one blinker lense is broken , rest are fine. Both quarter panel chrome moulds are still in place and undamaged.
Nick , motor is no longer goin , The twin carbies are gone . Heads coming off tomorrow.. Dizzies gone also.

Extractors are now gone, , But i have a worked grey motor head which was pulled off today for sale . It has been ported out , enough that it doesnt have the three rings in it anymore, So its pretty  well ported out , Has large valves and is also running double valve springs.., Its a pretty good grey head actually, Im asking $350 for it. Its located in Sydney , So interstate buyers will have to organize there own freight.,, It had twin Klenieg carbies running off the head , jUst for the curious.. The bottom end is available also for $350 .. Its a pot luck as i know nothing about bottom ends on grey engines so im unsure by looking at the pistons whats done to it But im told it has a burt jones race cam .,, Im goin to pull the timing case cover off and see if it has fibre timing grears or alloy tomorrow if i get a chance,.. The top where the head bolts on shows signs off being machined and the head gasket looked pretty good too , But im unsure how long the actual motor has been sitting... slim 0401303998

My name is Merlin......Merlin the  mAgician...  :D :D :D

I wonder if its a normal box in it then if the motor had the Bert Jones wild cam in it.

not to sure about the box merlin , but it has a WICKED FLOORSHIFT... WICKED WICKED. lol

Hey Slim, can you post details of the ID plate and the chassis number please for my collection.

Ken

The Worked grey head and motor have  been Sold,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, KEN  Id numbers on tag are as follows    ......  Body  FC 225. 19906-S     .......TRIM  297-637. ,,,,,,,,,,     PAINT 256-2031,, .........    INSERT 253 9665......    Chassis number unrecognizable. must of been one of them famous Friday afternoon cars.

Thanks Slim

How are there rear quarter panels and boot extension. Here is hoping...

John, for pictures check here http://fefcholden.org.au/forum/index.php/topic,20012.0.html ($2)

Cheers Stewy   8)

Can any one enlighten me as to why this car would have short rear guard stainless trims and no front guard / door trims.


regards


Weddo

Early custom perhaps ??? ::) ;D

I think its a late 1959 model , its got the round switches for the interior light , perhaps its an ek rear mould or something .. !!!!!!!!!!!!!!!

It's that bloody Merlin at it again!!!  :o :o :o :o :o

Hi Slim,
  do you still have the Holden special badges on the rear 1/4's ? if so are they in good nick ?


I'm in the need for a few other parts se how it goes


cheers

FE 4 ME

hi slim ,do you still have the front door hinge springs? thanks viv

Slim,

Do you have the rear number plate light bracket assembly?

Cheers
John

also the horn wiring some parts ( springs and spacers steering sides to parts ect)most parts excluding horn button.....  full horn ring if you got it.... front seat front brackets/clips..... special rear 1/4 badges... and the list goes on... be in touch


FE 4 ME

Looking for driver side arm rest. Matt :)

hi, looking for l/hand rear scuff plate

hope you can help

cheers Phil ( pbh0069 )

  Hey Phil,
   fe and fc are different you need the fe one.

    cheers
    Scott

sorry did not know

thanks scott.

sorry its taken a while to respond iv been pretty busy. pms sent to all enquiries today , thanks .

Hi slim, what about the chrome trim around the front window?

front screen mould is gone , sorry mate

Theres still plenty of parts left on this fc is anybodies after any little bits . Try me out , i may just have it. Still a roller with all doors, all glass, all brakes. Gearbox. Diff. Steering column, Mag wheels. Perhaps someone would like a rear cut for a lounge or a bbq. .. Slim 0401303998. ,in nsw

Hi Slim
Can you send a photo of the wheels.
email dmoore@amic.org.au
cheers Darren.

Hey Slim
what are the sections on the lower windscreen corners like. ??? especially need the drivers side. I don't know if you had intended to cut it up. Also LHS rear wheel arch front section dog leg????
   
Re: What the hell!
« Reply #57 on: May 26, 2010, 11:56:40 AM »
0
Fixings sent yesterday... should get them today.
Nick

sorry mate , them sections under the windscreen corners are gone altogether as are the dogs legs both sides. .

darren photos of wheels have been sent to your nominated email

This fc will be getting completely cutup next week so i will notify members of the forum as to any useful replacement rust sections and useable parts iv got... Rear cut will be available , roof turret, firewall, subfame requiring rust repairs, and more. cheers slim