|
Title: gearbox crossmember mount Post by: FC 304 wannabe on November 15, 2011, 08:29:27 PM Hi guys, got my 304 v8 into my fc today !!
Now I have to fabricate a gearbox mount... Any suggestions, the box is a t700 . I've heard a 3 degree angle on the tailshaft is needed.... Title: Re: gearbox crossmember mount Post by: FCV08 on November 15, 2011, 11:24:24 PM FC 304 wannabe I have manufactured my own but have also modified under the floor to fit the mount. My thread is Here we go again !!! on about page 3 of the Under Construction topic. (struggling to put the link in) May help you. I am sure there are many suggestions that will come your way. Good Luck Craig D |