|
Title: seatons bell housing Post by: clivetitchener on September 03, 2011, 12:43:58 PM hi all i have a seatons made bell housing specifically made for a grey motor to toyota 5 speed conversion i have tried to find who seatons were but with no luck i need to know what clutch fork to use with this housing any help would be greatly apprecited thanks clive
Title: Re: seatons bell housing Post by: Harv on September 05, 2011, 08:17:59 AM Clive,
Both Dellow and CRS do coversions for the Toyota steel-case box to grey, though neither do the alloy cases to grey :( (they do have alloy case to red/blue/black though). http://www.rodshop.com.au/trans_conversions/2wd_trans.htm http://www.dellowconversions.com.au/images/DellowAutomotive.pdf Maybe give them a yell and see what they suggest? Cheers, Harv. Title: Re: seatons bell housing Post by: clivetitchener on September 05, 2011, 09:42:22 AM thanks harv i will give them a call clive
Title: Re: seatons bell housing Post by: clivetitchener on September 05, 2011, 10:08:30 PM hi all today i had a bit of luck i googled seatons and got an address here in perth my phone call resulted in the information i needed about the clutch fork for the bell housing . now i have to search for a clutch fork from an early toyota celica /corona corrolla (rear wheel drive) so if you know where i can get one or you have one your self i will certainly put it to good use ,please leave details thanks clive
Title: Re: seatons bell housing Post by: Harv on September 06, 2011, 05:53:16 PM Good news ;D.
Ask a silly question Clive - is the Seatons setup for steel case or alloy case Toyota boxes? Cheers, Harv. |