FE-FC Holden Discussion Forum

Technical Board => General Technical => Topic started by: weddo on August 26, 2011, 08:11:44 PM



Title: Tappet Adjusters
Post by: weddo on August 26, 2011, 08:11:44 PM
I am getting ready to build a spare motor for our race car and intend using a set of early chev tappet adjusters as they fit inside the cup of the pushrods a little better at high revs. They are the same thread and lock nut as the grey motor adjusters. However I have misplaced one and only have eleven.

Would any body have one laying around in the shed somewhere that lookes like this.


(http://s3.postimage.org/1tmoz9lfo/P1010142.jpg) ($2)


regards

Weddo