|
Title: Boost Controllers Post by: wayne.c on June 03, 2011, 07:28:11 AM Hey Guys
Would be good to know what others out there are using as boost controllers on there turbos?? It has been suggested that a Greddy Profec B is a good choice has anybody got one or had any experiences with them. Thanks for any feed back Wayne Title: Re: Boost Controllers Post by: FCRB26 on June 03, 2011, 07:34:18 AM Mine will use the provision off the Haltech 2000 series computer so its staged boost on the rb26...
Cant go wrong with Greddy or turbosmart stuff.. Title: Re: Boost Controllers Post by: GMB-58FC on June 23, 2011, 07:52:07 PM Its comes down to if you want to run an EBC or not. Personally you cant go past a turbotech valve, its been proven time and time again that they not only stack up against all the big names but actually out perform them to the point that the bigger brands had to go back to the drawing board and change there designs.
http://www.ebay.com.au/itm/Turbotech-manual-turbo-boost-controller-ORIGINAL-/220630394267 Before you go out and spend BIG $$$'s on an EBC give one of these a try first and you wont be disappointed I will guarantee it ;) |