|
Title: headlining support bar plastic inserts Post by: brett_f on April 28, 2011, 08:26:59 PM Hi Guys,
Getting ready to re-install headling and have been told the bars should have plastic ends to stop them from sqeaking. What are people using for these and does anyone have a set. Regards Brett Title: Re: headlining support bar plastic inserts Post by: zulu on April 28, 2011, 09:04:32 PM Hi Brett All I have noticed in the 2 or 3 head linings I have removed from our models is a simple small square scrap (about 2 x 2 cm) of seat or headlining material attached at the dogleg of each bow presumably to stop it rubbing metal on metal It just has a hole in the centre and slips over each end of the bows Gary Title: Re: headlining support bar plastic inserts Post by: brett_f on April 28, 2011, 09:53:36 PM Thanks Gary,
Much appreciated. brett Title: Re: headlining support bar plastic inserts Post by: Stewy on April 28, 2011, 10:49:57 PM Hi guys,
I pulled the headlining out of an FC wagon a few weeks ago and what Gary describes was exactly what I found ;) Cheers Stewy 8) |