|
Title: Chrome bumper bar bolts Post by: brett_f on March 29, 2011, 07:47:39 PM G'Day Guys
Looking for a new set of chrome bumper bar bolts. 6 in total. Rares have none and the ones on ebay are incorrect. If anyone knows where i can buy the set or have some they are not using please let me know. Regards Brett Title: Re: Chrome bumper bar bolts Post by: Glenn 'Stinky' Stankevicius on March 29, 2011, 08:37:28 PM The ones on my FE were from a fastener shop, full stainless steel. I took in my old ones and they matched them perfectly, all I had to do was file off the lettering and polish them up, just like bought ones ;)
(http://s1.postimage.org/1cmjkc1z8/Mt_Gambier_Nats_2008.jpg) ($2) Title: Re: Chrome bumper bar bolts Post by: FC427 on March 29, 2011, 08:54:11 PM The Bumper Bar bolt kit are on ebay .....FC427.....
Title: Re: Chrome bumper bar bolts Post by: FE 4 ME on March 29, 2011, 09:29:01 PM Stinky,
can you tell me the size and length of the rear side bolts so i can go down to my local and see if they have them in stainless ...sounds like a great idea FE 4 ME Title: Re: Chrome bumper bar bolts Post by: Glenn 'Stinky' Stankevicius on March 29, 2011, 09:32:55 PM Stinky, can you tell me the size and length of the rear side bolts so i can go down to my local and see if they have them in stainless ...sounds like a great idea FE 4 ME No idea sorry, took my old ones in and they matched them, I binned them after that. Title: Re: Chrome bumper bar bolts Post by: FE 4 ME on March 29, 2011, 09:36:15 PM ive got some here ( maybe 1 laying around..not sure about a pair ), but they look too short..were your rear side ones approx 1 1/2 long if you can roughly recall ??
this looks around that length cheers Stinky FE 4 ME Title: Re: Chrome bumper bar bolts Post by: brett_f on March 29, 2011, 10:22:16 PM Thanks for the replies but i want the chrome ones. The sizes are 2x 5/16x2", 2x 5/16x 1 1/2' and 2x 7/16x 1"
Regards Brett Title: Re: Chrome bumper bar bolts Post by: JB on March 29, 2011, 10:39:12 PM This is the site I have seen on ebay.
http://cgi.ebay.com.au/NEW-BUMPER-BAR-BOLTS-SUITS-FE-FC-EJ-EH-HOLDEN_W0QQitemZ170617812795QQihZ007QQcategoryZ6763QQssPageNameZWDVWQQrdZ1QQcmdZViewItem#ht_1121wt_1141 Are they the ones you have seen? JB Title: Re: Chrome bumper bar bolts Post by: zulu on March 29, 2011, 10:49:28 PM Brett says the epay ones are no good. If you still have, or can get the originals they will polish up as they are a stailnless steel shell over a steel bolt, at least thats what I did with some of mine. Stinky seems to have the best answer, try a bolt & fastner shop for stainless steel & have them polished Title: Re: Chrome bumper bar bolts Post by: brett_f on March 30, 2011, 08:26:30 AM JB
They are the ones i have seen. If you look at the pic they are all the same length and size. No good for the FC. Zulu, i do have the originals but the chrome is down and i dont want to put them on new bars. Might have to get them rechromed if nothing comes up. Thanks for all replies so far. Brett |