|
Title: HR front end in a FC Post by: Muz on February 28, 2011, 07:44:00 PM If i put a complete HR front end and strreing arms in my FC ,will my grey motor fit in without modifing the sump? Can any one help .Cheers
Title: Re: HR front end in a FC Post by: FC427 on February 28, 2011, 07:48:09 PM It will fit but you still need to change out rigger and the steering arms will just hit the sump on full lock that's my experience with it .....FC427....
Title: Re: HR front end in a FC Post by: Muz on February 28, 2011, 08:00:39 PM Out rigger has been changed, Is there any thing that can be done so the steering dosnt hit ,Grinding or re fadracting. Cheers
Title: Re: HR front end in a FC Post by: FCRB26 on February 28, 2011, 08:03:44 PM somethings wrong steering should not hit .
are you using HR daglink or FC check your front engine mount is not persished. Are you running original box or something else. Title: Re: HR front end in a FC Post by: mcl1959 on February 28, 2011, 08:24:38 PM FC draglinks will just hit, HR draglinks wont hit
Ken Title: Re: HR front end in a FC Post by: ratbox on February 28, 2011, 08:36:59 PM but doesn't the HR draglink sit further back ? i've found with red motors on full lock the draglink hits the sump but changed back to EK and problem solved, my motors aren't to far forward as i set them back as far as i possably can missing firewall seem by millemeters
may be a different case with a grey motor Title: Re: HR front end in a FC Post by: Muz on February 28, 2011, 09:29:36 PM I am using a HR crossmember,and steering arms including the draglink. Will the grey motor sump be alright or does it hit ? Cheers Muz
Title: Re: HR front end in a FC Post by: FCRB26 on March 01, 2011, 06:14:37 AM Using a grey motor and HR draglink clears everything .... ;)
Title: Re: HR front end in a FC Post by: colt on March 01, 2011, 10:26:00 AM Same as what fchoon said. HR draglink with grey motor is all clear.
|