FE-FC Holden Discussion Forum

For Sale and Wanted => Parts For Sale => Topic started by: jasonr70002 on January 10, 2011, 02:49:32 PM



Title: Holdens and stuff
Post by: jasonr70002 on January 10, 2011, 02:49:32 PM
I have for sale

1. An Extended cab HX one tonner which is suitable for doing up. It drives and has a 202 with trimatic and 3.55 banjo diff. Needs a drivers and passenger pan and finishing off on the cab as I have already replaced both plenums and very front edge of roof it also has new ball joints all round and tie rods and also new diff bearings. It has all mod plates and only needs finishing off ie paint and body work. $1500. ONO

2. 1956 Fe sedan which has had all rust removed and new panels welded in except spare wheel well. It has about 10 doors and there is a full set of rust free ones in the 10. It is a roller at the moment with original front end and EH diff. Also has a running grey motor and gearbox and a half and full horn ring steering columns. No interior and no rear screen or front bumper and drivers guard. $1200. ONO.

3.Fresh 202 ready to use minus accessories in fantastic condition with fresh paint as well with brand new chrome rocker cover and side plates. There is a HQ sump loosely bolted to it so will need sump gaskets and whatever sump you use if its not a HQ one.  $300. ONO

4. Holley manifold that has been partly polished. Is a cain but has had letters removed for polishing. $55.

5. Electronic dizzy which is the type with the seperate module made by bosch and is ready to use. $80. ONO

Pm me or ring Jason on 0431376609 and I am in Toowoomba area QLD