FE-FC Holden Discussion Forum

For Sale and Wanted => Parts For Sale => Topic started by: ashfe on November 02, 2010, 05:52:38 PM



Title: drag ways
Post by: ashfe on November 02, 2010, 05:52:38 PM
i have  2 pairs of dragways  2 13x8's and 14x8's 13 have good tyres 14 tyres are shot not sure how much there worth will put pics up soon located ballarat vic


Title: Re: drag ways
Post by: ashfe on November 02, 2010, 06:00:44 PM
(http://i593.photobucket.com/albums/tt17/ashfe/Image006-1.jpg)
13 inch tyres are road hugger 205 60 13 with about 60-70% tread


Title: Re: drag ways
Post by: FC_NUT on November 03, 2010, 12:15:26 AM
Hi, what is the condition is the chrome on the rims, and will you sell the 13inch pair only?

Regards Daimien


Title: Re: drag ways
Post by: newman on November 03, 2010, 08:35:36 AM
If Daimien is interested in the 13's I am keen on the 14's depending on condition of rims, are the rims straight without any gutter rash on the outer rims and could you take the old tyres off for transport? I'll send you an email address so you can send some close up pics of both of the 14's.

Mick 8)


Title: Re: drag ways
Post by: ashfe on November 03, 2010, 03:00:14 PM
the crome has some surface rust around edges there is no gutter rash on any of the rims 1 13 inch rim has very small dent about 10mm long by 5 mm if that will separate pairs taking offers as long as there realistic


Title: Re: drag ways
Post by: newman on November 03, 2010, 04:54:04 PM
Check your emails please, you sent me pics of a steering wheel mate.

Mick 8)


Title: Re: drag ways
Post by: ashfe on November 10, 2010, 07:30:36 PM
wheels still available


Title: Re: drag ways
Post by: weddo on November 11, 2010, 10:10:12 PM
The early 13 and 14 inch dragways had separable hoops and centres. New hoops are still available from ROH, the original hoop suppliers. The later dragways had a steel insert cast into the centres that was welded to the hoops. 13 x 7 is about the maximum you can run on a lowered FC front and rear without  modifications, or a different of set hoops, which will allow offset adjustment

regards


Weddo