|
Title: Oil Light Post by: fe on October 23, 2010, 07:49:13 PM Hi
My Oil light flicks on and off then sometimes never comes on Oil levels are fine ,any suggestions :-X Title: Re: Oil Light Post by: Glenn 'Stinky' Stankevicius on October 23, 2010, 08:55:34 PM Pull out the sender and check it :-\, I had some gunk blocking my oil pressure sender giving me low readings, cleaned it up and it was all good.
Title: Re: Oil Light Post by: GREGD on October 26, 2010, 11:38:30 AM Hi
First, fit a manual oil pressue guage to check that the pressure is ok. Then check your wiring as the fault can often be a short circuit remember your wiring loom is 50+ years old and will be brittle in spots the insulation may have broken away, a bare wire could short against the body causing a flashing warning light. Good luck GREGD |