|
Title: Gearbox problem Post by: fe on October 22, 2010, 01:39:55 PM Hi my fe jumps out of third often ,can anyone tell me why and what do I do to fix this
I have the standard 3 speed crunch box Graeme :) Title: Re: Gearbox problem Post by: EffCee on October 22, 2010, 03:37:16 PM Hi Graeme,
Firstly check your gearbox linages to ensure that the selectors are moving correctly into position. If this is correct then you will find that either the bearings or the sahfts between the 1st motion shaft and the 3rd motion shaft are worn. To correct this problem the gearbox will need to be overhauled. Keith Title: Re: Gearbox problem Post by: GREGD on October 26, 2010, 11:39:54 AM Hi
check the detent spring too GREGD |