|
Title: seatbelts Post by: 59 me on August 21, 2010, 04:31:19 PM hi,just wondering if someone can inform me of i have a 59 fc that is registered in victoria with no seatbelts..i was going to install 5 seatbelts from either hemco or klippan for the kids and myself and i've heard you need to get a engineers certificate ...is this true ? and why...? ..Whats the best way to tackle this...cheers mike
Title: Re: seatbelts Post by: GMHwagoon on August 22, 2010, 05:24:46 PM hope this helps
having just registered my fc wagon in victoria, l come off club rego and my car only had front seat belts by what you are saying your car has already got rego and no belts at all the only reason l can see for getting a engineers cert would be to cover yourself insurance wise if by some bad luck you had an accident. also look in the back these are your kids sitting there,do it safely do it properly belts need to be retractable also you will need to put three in the front and back, lap for the middle anchoring plates need to be a certain size and have rounded corners as to not tear the floor on sudden impact suggest you do ask an engineer mine was pretty basic $500 all up done the work myself pass ok peace of mind that counts another reason if you go more than 10% more in engine capacity grey motor to 186 say you need certificate for rego hope this helps Title: Re: seatbelts Post by: 59 me on August 23, 2010, 07:41:20 PM thanks ...much apprciated
|