FE-FC Holden Discussion Forum

General => General Board => Topic started by: nick on July 24, 2000, 12:00:00 PM



Title: ute venetian
Post by: nick on July 24, 2000, 12:00:00 PM
Is the EK/FB ute venetian the same as the FE/FC? Thanks.


Title: Re: ute venetian
Post by: none@unknown.net on July 25, 2000, 12:00:00 PM
yes


Title: Re: ute venetian
Post by: Ken McLean on July 28, 2000, 12:00:00 PM
No they're not.  The side panels are longer on the FE/FC. Structural problems saw the FB/EK come out with thicker pillars, hence the venetian was a little smaller. FE/FC venetians will fit into FB/EK after trimming the bottom 3 slats.    Hope this helps   Ken McLean