|
Title: Heater Switch Post by: mike on February 03, 2003, 05:32:29 AM Hi I am in the process of setting up my smiths heater (2 door type) into my FE and was wondering what switch is meant to be used and where does it mount and does anyone have a spare one for sale.
thanks mike. Title: Re: Heater Switch Post by: coolaride on February 03, 2003, 05:59:08 AM hey there
there was a preslite variable speed switch available which mounted on the right hand side of the dash face. this switch is very hard to come by.( it took me a while to find mine .) also a nasco switch which is black and its just a pull type . readily available at swap meets . i`ll see if i can find one for you. hope this helps. cheers coolaride. Title: Re: Heater Switch Post by: coolaride on February 03, 2003, 06:07:45 AM hi again
i meant to mention that i have a nos pleslite switch knob which is for sale , you can mount it in the same position and put a different switch behind it . it should look ok too. cheers Title: Re: Heater Switch Post by: mike on February 03, 2003, 07:00:43 AM Thanks Coolaride if I can get a switch i will probably grab the new knob, also can anyone put on a picture of the types of switches so I know what to look for, knowing me I have probably walked past them a dozen times and not realised.
thanks mike. Title: Re: Heater Switch Post by: coolaride on February 03, 2003, 11:26:26 AM hi
DOH! i forgot about the switch in my own car . theres now i picture of it in the parts for sale section. cheers. |