|
Title: RUST CONVERTER Post by: graham_fuller on January 20, 2010, 01:49:22 PM What is the best product to use for surface rust converter?
Cheers, Graham Title: Re: RUST CONVERTER Post by: Ken's 57 on January 20, 2010, 10:30:47 PM Graham - I found Metal-Ready worked really well.
http://www.por15.com.au/ Cheers......Ken Title: Re: RUST CONVERTER Post by: graham_fuller on January 21, 2010, 07:07:06 AM Thanks Ken,
Do I need to use etch primer afterwards. These are external body panels. Cheers and thanks, Graham Title: Re: RUST CONVERTER Post by: FC427 on January 21, 2010, 08:45:44 AM Dexodine as [per instructions] with a nylon scourer and then etch ......FC427......
Title: Re: RUST CONVERTER Post by: graham_fuller on January 21, 2010, 01:34:44 PM Thanks Mark,
Does Deoxodine remove the surface rust? Cheers, Graham Title: Re: RUST CONVERTER Post by: FC427 on January 21, 2010, 06:19:22 PM Sure does if you can't get Dexodine most Metal Conditioners from the spray paint supply shops will work there are many different brands .......FC427.....
Title: Re: RUST CONVERTER Post by: Ken's 57 on January 22, 2010, 08:50:51 AM Graham - I'm pretty sure it etches the metal making it ready for painting. It's also non-caustic and water soluble which I prefer. They're usually happy to help over the phone if you need a bit of advice.
Tel: 9999 0122 |