|
Title: Here we go again!!! Post by: FCV08 on December 22, 2009, 11:45:21 PM Here is a photo update to where it is at. My upgrade includes fitting the V8 and other bits from a VN donor.
[http://s884.photobucket.com/albums/ac49/WhiteFC/WhiteFC%20Progress%20Dec09/] Currently gutting out all to get the modifications started Cheers Craig Title: Re: Here we go again!!! Post by: FCV08 on December 23, 2009, 12:05:57 AM I will it try again ??? ??? ??? >:(
(http://i884.photobucket.com/albums/ac49/WhiteFC/WhiteFC%20Progress%20Dec09/PICT0731.jpg) (http://i884.photobucket.com/albums/ac49/WhiteFC/WhiteFC%20Progress%20Dec09/PICT0740.jpg) (http://i884.photobucket.com/albums/ac49/WhiteFC/WhiteFC%20Progress%20Dec09/PICT0735.jpg) (http://i884.photobucket.com/albums/ac49/WhiteFC/WhiteFC%20Progress%20Dec09/PICT0736.jpg) (http://i884.photobucket.com/albums/ac49/WhiteFC/WhiteFC%20Progress%20Dec09/PICT0729.jpg) Some of the left overs will be for sale Cheers Craig Title: Re: Here we go again!!! Post by: FCOV6 on December 23, 2009, 08:41:20 PM Hi mate, what seats are those ?
Title: Re: Here we go again!!! Post by: FCV08 on December 23, 2009, 10:35:56 PM FCOV6
Dare I say it, they are out of a F#*^ KB Laser with headrests removed. Rgds Craig Title: Re: Here we go again!!! Post by: FCOV6 on December 23, 2009, 10:41:32 PM FCOV6 Dare I say it, they are out of a F#*^ KB Laser with headrests removed. Rgds Craig Thanks, they look good minus the headrests. Title: Re: Here we go again!!! Post by: FCV08 on December 23, 2009, 10:47:19 PM FCOV6
I am not sure with the current mods planned as I may need to refit some headrests. My thoughts are to refit headrests and then make up a cover plate to cover the mounting holes. What's your thoughts Rgds Title: Re: Here we go again!!! Post by: FCOV6 on December 24, 2009, 02:08:46 PM If it worked before i'd leave it as is, you dont need to change the seats and if the engineer says you need headrest then just refit them.
Title: Re: Here we go again!!! Post by: FCV08 on March 09, 2010, 11:44:36 PM Oh how it seems so far away yet so close.
(http://i884.photobucket.com/albums/ac49/WhiteFC/WhiteFC%20Progress%20Dec09/March%2010%20Progress/07032010004.jpg) (http://i884.photobucket.com/albums/ac49/WhiteFC/WhiteFC%20Progress%20Dec09/March%2010%20Progress/07032010009.jpg) (http://i884.photobucket.com/albums/ac49/WhiteFC/WhiteFC%20Progress%20Dec09/March%2010%20Progress/07032010008-1.jpg) (http://i884.photobucket.com/albums/ac49/WhiteFC/WhiteFC%20Progress%20Dec09/March%2010%20Progress/07032010005-1.jpg) The typical birdsnest (http://i884.photobucket.com/albums/ac49/WhiteFC/WhiteFC%20Progress%20Dec09/March%2010%20Progress/07032010003.jpg) The subframe and firewall just need a cleanup as both Brake and clutch M'Cyl have leaked and eaten through paintwork. I have managed to modify the VN wiper motor similar to Brett FCs. I have also had to modify the mounting crank using the VN taper and the original EK mount (??). The reason for this is to give enough depth, through the firewall, to allow the crank rotate without hitting anything due to the shaft on the VN Wiper Motor being about 1 cm shorter. The modified crank increases the distance between the shaft mount and the wiper arm mount to about 15mm. I will get some more photos to show the mod. I would like additional thoughts on how this may be a cost effective option for those seeking the two speed wiper motor option. Craig Title: Re: Here we go again!!! Post by: FCV08 on August 23, 2010, 03:41:45 PM Update 2010
I have started the mods firstly with the new transmisson tunnel. Firstly was the deed of cutting the old tunnel out. That was a little daunting :o :o (http://i938.photobucket.com/albums/ad228/craigrdennis/Trans%20Tunnel/TransTunnel1.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/Trans%20Tunnel/TransTunnel2.jpg) Then came the fittiing of the new tunnel which I tec screwwed in as per advice from another post. (http://i938.photobucket.com/albums/ad228/craigrdennis/Trans%20Tunnel/TransTunnel3.jpg) Then the job of welding it in. The larger task was to clean up all the old sound proffing on the floor. (http://i938.photobucket.com/albums/ad228/craigrdennis/Trans%20Tunnel/TransTunnel7.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/Trans%20Tunnel/TransTunnel6.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/Trans%20Tunnel/TransTunnel4.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/Trans%20Tunnel/TransTunnel5.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/Trans%20Tunnel/TransTunnel8.jpg) I have since started to mount brake booster and have my front end back to mount back in and start sorting the Engine/Transmission position. Regards Craig Title: Re: Here we go again!!! Post by: customFC on August 23, 2010, 11:55:16 PM Nice progress.
Regards Alex Title: Re: Here we go again!!! Post by: FCV08 on February 13, 2011, 12:38:11 AM Here are some more progress shots. I have repaired the pax side A pillar, LHF floor as well as manufactured some engine mounts to get the correct height and position at the firewall.
One of the motivators is to get the damn steering wheel on and drive it out of the shed ;D ;D ;D (http://i938.photobucket.com/albums/ad228/craigrdennis/Steering%20Wheel/PICT0311.jpg) The pearled wheel is courtesy our friends at Bega. It is a white and cream pearl with the chrome seperator bands. I am really happy with the result. Now I just need to rechrome the horn ring and sort out the steering wheel badge. (http://i938.photobucket.com/albums/ad228/craigrdennis/Steering%20Wheel/PICT0312.jpg) Here are my rust repairs (http://i938.photobucket.com/albums/ad228/craigrdennis/Rust%20repairs/PICT0073.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/Rust%20repairs/PICT0074.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/Rust%20repairs/PICT0075.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/Rust%20repairs/PICT0076.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/Rust%20repairs/PICT0077.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/Rust%20repairs/PICT0078.jpg) Here is my dog Molly who was missing for a week during the QLD Floods. Thank god she is back home ;D ;D ;D (http://i938.photobucket.com/albums/ad228/craigrdennis/Rust%20repairs/PICT0079.jpg) Trial and error has gotten me through the engine mounts. I have slotted the mounts onto the engine to allow me to move the engine forward or back about half an inch. Running Gilmer Drive so will need a little more room (http://i938.photobucket.com/albums/ad228/craigrdennis/White%20FC%20Accelerator%20Mods/Engine%20Install/PICT0306.jpg) In we go ??? ??? (http://i938.photobucket.com/albums/ad228/craigrdennis/White%20FC%20Accelerator%20Mods/Engine%20Install/PICT0305.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/White%20FC%20Accelerator%20Mods/Engine%20Install/PICT0304.jpg) About 15mm gap to firewall (http://i938.photobucket.com/albums/ad228/craigrdennis/White%20FC%20Accelerator%20Mods/Engine%20Install/PICT0303.jpg) Pax side mount (http://i938.photobucket.com/albums/ad228/craigrdennis/White%20FC%20Accelerator%20Mods/Engine%20Install/PICT0302.jpg) Pax side mount from front (http://i938.photobucket.com/albums/ad228/craigrdennis/White%20FC%20Accelerator%20Mods/Engine%20Install/PICT0301.jpg) Front view of Drivers side engine mount (http://i938.photobucket.com/albums/ad228/craigrdennis/White%20FC%20Accelerator%20Mods/Engine%20Install/PICT0300.jpg) Top view of new engine mount bracket (http://i938.photobucket.com/albums/ad228/craigrdennis/White%20FC%20Accelerator%20Mods/Engine%20Install/PICT0299.jpg) Next is the gearbox mount. Any advice from the gurus would be appreciated. ;) ;) I have also had the VN Diff shortened and looking to connect all brakes etc. in the next few weeks. Until next time Regards Craig D Title: Re: Here we go again!!! Post by: NosFEratu on February 13, 2011, 08:00:10 AM oooooh Pearl Steering Wheel - must commend you on your good taste! ;) :D
So pleased to know that Molly is safe and well and home again - I bet she could tell you a Title: Re: Here we go again!!! Post by: FCV08 on February 15, 2011, 10:38:13 PM Oh if only Molly could talk. ;D ;D ;D
Really happy with the pearled wheel. Should set the interior up well. Cheers Craig Title: Re: Here we go again!!! Post by: FCV08 on May 04, 2011, 10:00:38 PM Just a quick progress report.
I have completed all the underfloor strengthening and have modified the under floor subframe and manufactured a new transmission crossmember. Also manufactured a new handbrake lever to suit match the VN cable to the original FC Handbrake front cable setup. Now looking to maunfacture new brake lines and fuel lines to suit. I have also fitted B&M shifter, rear diff, front end and modified steering column. I will upload some photos shortly. Very chuffed a my enigneer came over and passed all these mods. I also quizzed him on the engine capacity ruling and for my car all will be OK to fit the 304ci. Cheers Craig Title: Re: Here we go again!!! Post by: FCV08 on May 06, 2011, 08:45:11 PM Here are some photos of my mods passed by the engineer this week:
Gearbox Chassis mounts. These are made from 65 x 45RHS and have been reinforced with 40x5mm strap with captive nuts welded into place. (http://i938.photobucket.com/albums/ad228/craigrdennis/PICT0002.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/PICT0006.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/PICT0013.jpg) On the Car (http://i938.photobucket.com/albums/ad228/craigrdennis/PICT0019.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/PICT0016.jpg) Gearbox Crossmember was made from 50x50 x 2mm RHS and 25 x 50x 2mm RHS the plated with 65x3 mm strapping and 50. (http://i938.photobucket.com/albums/ad228/craigrdennis/Xmember14.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/Xmember10.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/Xmember13.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/Xmember1.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/Xmember5.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/Xmember2.jpg) I also have some photos of the fuel tank I am getting made by a friend. I am going to trial fit the LED reverse lights onto the tank as you will see. (http://i938.photobucket.com/albums/ad228/craigrdennis/Fuel%20Tank/fueltank004.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/Fuel%20Tank/fueltank007.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/Fuel%20Tank/fueltank014.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/Fuel%20Tank/fueltank015.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/Fuel%20Tank/fueltank018.jpg) Progress is slow but I am just trying to make sure all is OK before I move to the next stage. There are other shots to come and will take more photos tomorrow. I hope you enjoy them. P.S. If there are any other amputees out there on the forum please PM me as it would be good to have a chat. Regards Craig D Craig Title: Re: Here we go again!!! Post by: JB on May 06, 2011, 09:34:55 PM Looking the goods mate, keep the photos coming!! Doesn't matter how small the progress is the satisfaction of getting something else done is great.
Cheers JB Title: Re: Here we go again!!! Post by: Paul In Ireland on May 07, 2011, 08:10:07 AM That is looking good from where I am sitting. Well done and time is only something that passes in the night......
Title: Re: Here we go again!!! Post by: FCV08 on May 08, 2011, 09:40:26 PM Well here is some more photos of the handbrake setup as well as the shifter I have fitted.
This setup as you can see is very basic but it does the job. (http://i938.photobucket.com/albums/ad228/craigrdennis/Handbrake%20Assy/PICT0312.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/Handbrake%20Assy/PICT0308.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/Handbrake%20Assy/PICT0310.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/Handbrake%20Assy/PICT0309.jpg) You will see the handbrake lever on a slight angle downwards so that there is enough clearance for the front cable when it is attached to the lever. (http://i938.photobucket.com/albums/ad228/craigrdennis/Handbrake%20Assy/PICT0317.jpg) I have used the outer handbrake cable retainers, off the VN, but may need to extend them off the floor about 60mm to give me more room for the tailshaft. Other than that it all fits pretty well. (http://i938.photobucket.com/albums/ad228/craigrdennis/Handbrake%20Assy/PICT0306.jpg) Just a few shots of the trannie shifter as well. (http://i938.photobucket.com/albums/ad228/craigrdennis/Handbrake%20Assy/PICT0313.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/Handbrake%20Assy/PICT0314.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/Handbrake%20Assy/PICT0315.jpg) Have a good week everyone. Cheers Craig Title: Re: Here we go again!!! Post by: Ed on May 10, 2011, 08:42:39 AM Hi Craig,
Thanks for posting progress pics. Just a question with regard to the chassis rails. Did you go up through the floor with the rails? it's certainly a beefy trans mount, not worried about it hanging too low? I know mine used to be the lowest point of the car. Cheers Ed Title: Re: Here we go again!!! Post by: Ed on May 10, 2011, 08:43:23 AM forgot to add.. nice work.
Title: Re: Here we go again!!! Post by: FCV08 on May 10, 2011, 09:11:39 AM Ed
The rails are profile cut to the shape of the underside of the floor. I stitch welded them on utilising a 4 inch weld. They are also butt welded to the front underfloor crossmember and welded and plated at the rear front spring hanger. At the rear they are also capped to seal the top of the rails. Although you cannot see it the kframes are also plated with 3mm plate for strengthening the front end as part of the mod. Regards Craig Title: Re: Here we go again!!! Post by: FCV08 on May 12, 2011, 07:06:06 PM Got the number plates today.
(http://i938.photobucket.com/albums/ad228/craigrdennis/PICT0319.jpg) Can't wait to see them driving along the road. Cheers Craig D Title: Re: Here we go again!!! Post by: Old_Mt_Isa_Boy on May 12, 2011, 07:31:14 PM Craig they look great.
The car is not far now. The updates are a treat. Regards Wayne b Title: Re: Here we go again!!! Post by: FCV08 on August 08, 2011, 11:19:03 PM It has been a little while since the last update.
I have since fitted a under dash heater assy, radiator, battery cable, and new alloy fuel tank. I am avoiding the inevitable wiring like the plague. I will eventually ruin out of other things. Here are some shots of my work so far. Modified the radiator support brace. (http://i938.photobucket.com/albums/ad228/craigrdennis/VB%20V8%20Radiator%20into%20FC/IMG_0119.jpg) Along with the grill support panel (http://i938.photobucket.com/albums/ad228/craigrdennis/VB%20V8%20Radiator%20into%20FC/IMG_0117.jpg) Also recessed the front subframe and made up lower radiator support mounts whicxh have the original VN commodore rubber mounts (http://i938.photobucket.com/albums/ad228/craigrdennis/VB%20V8%20Radiator%20into%20FC/IMG_0116.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/VB%20V8%20Radiator%20into%20FC/IMG_0115.jpg) Boot floor removed and modified floor bracing and sheeting fitted waiting for new tank (http://i938.photobucket.com/albums/ad228/craigrdennis/Fuel%20Tank/fueltank022.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/Fuel%20Tank/fueltank026.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/Fuel%20Tank/fueltank025.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/Fuel%20Tank/fueltank024.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/Fuel%20Tank/fueltank023.jpg) Part 1 Title: Re: Here we go again!!! Post by: FCV08 on August 08, 2011, 11:29:33 PM Part 2 (too many photos to run all at once ??? ???)
and here is the new tank all fitted. Thanks goes to a great freind who build this off a set of hand drawn plans. Not bad !! (http://i938.photobucket.com/albums/ad228/craigrdennis/Fuel%20Tank/fueltank040.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/Fuel%20Tank/fueltank039.jpg) The two slots at the rear are for white LED lights strips as reversing lights (http://i938.photobucket.com/albums/ad228/craigrdennis/Fuel%20Tank/fueltank038.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/Fuel%20Tank/fueltank037.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/Fuel%20Tank/fueltank036.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/Fuel%20Tank/fueltank035.jpg) Enough room to run the exhaust down both sides (http://i938.photobucket.com/albums/ad228/craigrdennis/Fuel%20Tank/fueltank034.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/Fuel%20Tank/fueltank033.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/Fuel%20Tank/fueltank032.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/Fuel%20Tank/fueltank031.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/Fuel%20Tank/fueltank030.jpg) Capacity works out around 70 litres or roughly 15 1/2 gallons. May need and extra couple of leaves in the rear ;D ;D You will see the rear sway bar hanging underneath as well. I am currently chasing a modified sway bar and need to measure and send this one off to get one made. So there it is for now. I will add some shots of the heater core as well in the next post. Oh yes and that wiring >:( >:( Regards Craig D Title: Re: Here we go again!!! Post by: FE 4 ME on August 09, 2011, 12:28:29 PM Hi there,
great build you got going on.... the craftmanship in your welding and fabrication is inspiring to say the least 2 questions please 1. What MIG welder are you using ( looked kinda like a 130 amp in the pic ) ?.... i think i need a MIG welder soon 2. Is that a B&M Megashifter you installed ? if so can you post more pics of that install please ?? keep up the great work... i'm sure we all are looking forward to your next posts "Have A Great Holden ( FE ) Day !!!" :):):) FE 4 ME Title: Re: Here we go again!!! Post by: FCV08 on August 09, 2011, 12:33:49 PM FE4ME
Welder is a WIA 175. My neighbours actually. Good bloke. Cheers Craig D Title: Re: Here we go again!!! Post by: FCV08 on August 09, 2011, 12:48:47 PM Not a B&M Shifter but the parts are interchangeable.
I built mounts onto the tunnel so that it added a bit more strength to the setup. Will take some more photos at the weekend. Regards Craig D Title: Re: Here we go again!!! Post by: FCV08 on December 12, 2011, 11:20:00 PM Just and update to let everyone know the car is back from the paint shop.
Now to put it all back together. Will post some photos shortly. Cheers Craig D Title: Re: Here we go again!!! Post by: FCV08 on January 19, 2012, 02:14:55 PM It has been a little while so here is the update
(http://i938.photobucket.com/albums/ad228/craigrdennis/January%202012/IMG_1439.jpg) It has fitted (http://i938.photobucket.com/albums/ad228/craigrdennis/January%202012/IMG_1440.jpg) I ceramic coated the extractors to minimise heat around the starter motor area and engine bay (http://i938.photobucket.com/albums/ad228/craigrdennis/January%202012/IMG_1447.jpg) Battery Box and new fuel tank installed (http://i938.photobucket.com/albums/ad228/craigrdennis/January%202012/IMG_1448.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/January%202012/IMG_1454.jpg) Running the Starter cable from the boot (http://i938.photobucket.com/albums/ad228/craigrdennis/January%202012/IMG_1442.jpg) Fuel and brakeline plumbing. That was fun ??? ??? (http://i938.photobucket.com/albums/ad228/craigrdennis/January%202012/IMG_1451.jpg) Fuel Pump Mounting (http://i938.photobucket.com/albums/ad228/craigrdennis/January%202012/IMG_1455.jpg) Through to the engine bay. (http://i938.photobucket.com/albums/ad228/craigrdennis/January%202012/IMG_1444.jpg) Shortened VN Diff and Custom Sway bar. Fulcrum Suspensions in Brissie were very helpful with making up the sway bar. Price was very reasonable. (http://i938.photobucket.com/albums/ad228/craigrdennis/January%202012/IMG_1461.jpg) Bit more colour. Still toiling away and now thinking of the wiring tasks. Hope you enjoy the update. Cheers Craig D Title: Re: Here we go again!!! Post by: JB on January 19, 2012, 04:32:40 PM So envious mate,
It looks fantastic!!! I know how it sounds too!!! Bet you cant wait to fire it up. Cheers JB Title: Re: Here we go again!!! Post by: customFC on January 19, 2012, 09:53:37 PM Some nice progress.
Good to see you made it all fit. Regards Alex Title: Re: Here we go again!!! Post by: jack_fc on January 20, 2012, 09:50:54 AM It just gets better and better... :) Looks great Craig; you must be getting excited at the prospect of getting it on the road by now... Be interesting to see what you do with the interior (it will need to be bloody good to match the rest of the car!) cheers, jack Title: Re: Here we go again!!! Post by: FCV08 on January 20, 2012, 09:53:39 AM Thanks Jack
Interior is done and in the shed. Will post some photos. Regards Craig D Title: Re: Here we go again!!! Post by: Old_Mt_Isa_Boy on January 21, 2012, 07:41:16 AM Good stuff Craig. That custom sway bar looks the part.
Regards Wayne b Title: Re: Here we go again!!! Post by: FCV08 on January 23, 2012, 11:28:12 PM Here are some photos of the interior.
Seats - Embroidery, although not original, is a due to a touch of inspiration from Jack's efforts in white. Thanks Jack. I showed your photos to the upholsterer and he was certainly impressed. (http://i938.photobucket.com/albums/ad228/craigrdennis/Upholstery%202012/IMG_1467.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/Upholstery%202012/IMG_1462.jpg) Door trims back to a near original pattern (http://i938.photobucket.com/albums/ad228/craigrdennis/Upholstery%202012/IMG_1466.jpg) Visor completed (http://i938.photobucket.com/albums/ad228/craigrdennis/Upholstery%202012/IMG_1465.jpg) Panic straps, arm rests and visors (http://i938.photobucket.com/albums/ad228/craigrdennis/Upholstery%202012/IMG_1463.jpg) Well now its down to putting it all back together. Cheers Craig D Title: Re: Here we go again!!! Post by: 2brite on January 24, 2012, 12:22:08 AM Love those seats
Title: Re: Here we go again!!! Post by: jack_fc on January 24, 2012, 04:32:34 AM Very impressive, Craig! 8) 8) (but you knew I'd say that... ;)) BTW, rather than thanking me, thank Kathi - there was a hell of a lot of her influence shown in my interior... :) cheers, jack Title: Re: Here we go again!!! Post by: DN2168 on January 25, 2012, 05:43:05 PM Looking really good craig, how much more have you got to go?
Dean. Title: Re: Here we go again!!! Post by: FCV08 on January 27, 2012, 12:08:14 AM Dean
Thanks for the knid words. Still have all the wiring then put all the panels & doors back then interior. Cheers Craig D Title: Re: Here we go again!!! Post by: FCV08 on March 04, 2012, 08:16:25 PM Just a qucik update on where i am up to.
RE WIRING THE WHOLE BLOODY CAR ??? ??? ??? Toady I have nearly finished the engine bay. Had to work out how to mount the alternator a little bit higher to clear the inner guard. I designed a mounting plate that allowed me to rotate the alternator a little bit higher. As Pete (aka FC Hoon) is a little too far away I sussed out an engineering firm in Toowoomba who cut it off a cardborad template. For any of you fellas out ther if you need one I can get one made for around $45 per plate. Will post some photos shortly. Cheers Craig D Title: Re: Here we go again!!! Post by: FireKraka on March 26, 2012, 05:21:48 PM Hi Craig;
Where did you get your fuel lines made or did you buy material and bend them up yourself if so what size material. Anybody else have ideas I am at the point of running my lines from the VP fuel tank to the V6 I have a set of commodore lines but being prebent they are hard to reform or are they able to be annealed and reused. Yeh I know lots of questions but need the help. Don't mean to steal the thread Craig but your lines are so nicley laid out. Regards Neil H Title: Re: Here we go again!!! Post by: FCV08 on March 26, 2012, 05:55:23 PM Neil
I did attempt to use the original lines but ended up making my own after much sweat and tears. Oh how I wish I had a rotisserie. :D :D I used 8mm or 5/16. I bought a cheap double flaring tool kit from Super Cheap and half flare the ends to bell out for extra grip on the tube. Also bought a multi pipe bender (1/4, 5/16 and 3/8). If you still have the donor car grab the tube mounting brackets as well as they are very handy when mounting and insulating the lines. The tube I have used is mild steel and a little difficult to bend. I did get my hands on some lighter tubing that was way easier to bend and flare. I went back to the same shop and they had run out and only had the thick wall stuff. ??? ??? ??? I will try and get some photos of the fuel lines up into the engine bay as I have relocated the inline filter between the engine and firewall and return line in and around the steering mount plate I have also done a similar layout, utilising these insulated mounts, with the transmisson cooler lines along the subframe legs to the front subframe. Hope this helps. Thanks Craig D Title: Re: Here we go again!!! Post by: FCV08 on March 26, 2012, 06:11:30 PM Neil
Something else I came across when setting up my custom made tank was the fact that the fuel return line drops fuel directly onto the internal fuel pump to cool it. I had to go and make some adjustments to the tank to allow me to relocate the line to the appropiate spot. It was an educated guess which was spot on. Cheers Craig D Title: Re: Here we go again!!! Post by: FCRB26 on March 26, 2012, 07:13:08 PM I thought it drops directly onto the pump as its in the swirl pot to get that last drop of fuel into the pump and to keep it always swimming in juice.??
Title: Re: Here we go again!!! Post by: FCV08 on March 26, 2012, 07:48:39 PM Hoon
It could be a combination of both as when the fuel gets low there is not enough up around the pump body to cool it. When fitting the pump the base of the pump was sitting about 15mm off the bottom of the fuel tank at an angle and the top of the pump was about 100mm above the tank bottom. When the return lines sends it back it would run off the pump housing into the swirl pot. Thanks for your comments as all is good for my progress. Cheers Craig D Title: Re: Here we go again!!! Post by: FCRB26 on March 26, 2012, 08:47:59 PM Why were you sideways sir eeer to keep the fuel pump cool officer. ;D
Title: Re: Here we go again!!! Post by: JB on March 27, 2012, 09:24:36 AM I re used the original VT fuel lines, straightened them carefully with a block of wood and small taps with a hammer so not to kink the lines... Then re bent with a pipe bender. Not perfect but not a show car.
Cheers JB Title: Re: Here we go again!!! Post by: FireKraka on March 27, 2012, 03:35:05 PM Thanks guys great answers as always. I think I will try to straighten the original lines first and see how I go as I'm trying to stay on budget which isn't much not that a budget seems to matter when trying to build a car if you ever tried to add it all up you would never do it again.
I did get the rubber mounting blocks Craig and am going to use them, it was one of the things that I liked about your set up it certainly keeps them nice and neat. If I can't straighten the originals satisfactorily I will go to the brake shop and get some of their line as it is very easy to bend. Look forward to some more photos when you get a chance Craig. Your right JB my car was never built to be a show car either so I am not trying to be anal about them just don't want them to be all over the place and with the position of the return pipe because I'm using the standard VP tank and in tank pump I have not altered the position of the line so hopefully no issues there. Regards Neil H Title: Re: Here we go again!!! Post by: FCV08 on April 26, 2012, 09:57:24 PM Work has been kinda busy so progress has not been too fast
I did have trouble with the alternator being too low so I designed a mounting plate that allows the alternator to be moved inwards and upwards from its original position. Belt needed to be a little longer but it all fits and works. I did have to mod the top alternator mount by around 5mm to move it forward. The mounting plate was laser cut from a cardboard template. (how easy is that and only $40 ;) ;) ;)) (http://i938.photobucket.com/albums/ad228/craigrdennis/FE%20FC%20Archives/Electrical/IMG_1475.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/FE%20FC%20Archives/Electrical/IMG_1476.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/FE%20FC%20Archives/Electrical/IMG_1480.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/FE%20FC%20Archives/Electrical/IMG_1479.jpg) It has all fitted in well. Now to the wiring side of things. Engine side not so bad (http://i938.photobucket.com/albums/ad228/craigrdennis/FE%20FC%20Archives/Electrical/IMG_1486.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/FE%20FC%20Archives/Electrical/IMG_1490.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/FE%20FC%20Archives/Electrical/IMG_1487.jpg) Then comes the inside (http://i938.photobucket.com/albums/ad228/craigrdennis/FE%20FC%20Archives/Electrical/IMG_1491.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/FE%20FC%20Archives/Electrical/IMG_1484.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/FE%20FC%20Archives/Electrical/IMG_1492.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/FE%20FC%20Archives/Electrical/IMG_0095.jpg) And the reliable VN Wiring diaghrams. (http://i938.photobucket.com/albums/ad228/craigrdennis/FE%20FC%20Archives/Electrical/IMG_1494.jpg) Here is a preview of the body colour with some of the bling fitted (http://i938.photobucket.com/albums/ad228/craigrdennis/FC%20Body/IMG_1469.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/FC%20Body/IMG_1468.jpg) Having a crack at the thermo fan install. (http://i938.photobucket.com/albums/ad228/craigrdennis/White%20FC%20Accelerator%20Mods/Engine%20Install/IMG_1495.jpg) Will post a few more photos as I progress. Cheers Craig D Title: Re: Here we go again!!! Post by: JB on April 27, 2012, 12:44:33 AM The wiring just never ends!!! Had to cut and splice another 15 yesterday myself on the engine harness! At least yours is in colour. Not long now you will have it running.
Cheers JB Title: Re: Here we go again!!! Post by: Old_Mt_Isa_Boy on April 27, 2012, 06:50:20 PM Looks great Craig. Work does seem to get in the way. Your making progress.
Rgds Wayne b Title: Re: Here we go again!!! Post by: FC 304 wannabe on April 30, 2012, 04:24:52 PM hi Craig,
I can see in your pictures that you have had a custom rear sway bar done by fulcrum suspensions in Brisbane. which store was it? It is exactly what I need for my project. did you get a Commodore unit modified, or a complete new unit made? thanks, Shannon. Title: Re: Here we go again!!! Post by: FCV08 on April 30, 2012, 04:33:10 PM Shane
Nick was the contact at Hillcrest (07) 3800 7306 email = nickc@fulcrumsuspensions.com.au I used my old FC swaybar (aftermarket) and then taped the correct profile, made from a piece of wire, to shape around the diff centre. Not sure whether they still have it on file. Hope this helps Regards Craig D Title: Re: Here we go again!!! Post by: FC 304 wannabe on April 30, 2012, 05:04:03 PM thanks mate, nick is looking into it for me.....
with all the other hurdles to overcome with these builds, it would be great to get out of this one this easy.... Title: Re: Here we go again!!! Post by: FCV08 on April 30, 2012, 05:05:06 PM I still have the invoice on file so if Nick reuqires it let me know.
regards Craig D Title: Re: Here we go again!!! Post by: FE 4 ME on May 07, 2012, 05:19:07 PM You're doin a great job, with very practical ways to overcome problems. we all can learn and be encouraged with every issue we come across..where there's a will, there is a way !!!
good work mate, thankx for taking the time to post your build FE 4 ME Title: Re: Here we go again!!! Post by: FCV08 on May 09, 2012, 10:07:18 PM Guess who got the engine started tonight? ::) ::) ::) :D :D
A little loud with only the extractors but boy what a sound and Oh what a feeling. ;D ;D ;D Will post a few more photos soon. Thanks Craig D Title: Re: Here we go again!!! Post by: JB on May 10, 2012, 08:41:20 AM Where's the vid???
Title: Re: Here we go again!!! Post by: FCV08 on May 22, 2012, 09:05:45 PM JB will work out the video upload later.
Was looking for the headlight buckets for the front speakers and came across what I thought was an inexpensive substitute. Don't look too close but you can buy them from Woolies for about six bucks. I rivetted and sealled them in. (http://i938.photobucket.com/albums/ad228/craigrdennis/IMG_1506.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/IMG_1508.jpg) Here is my underdash gauge mount. I modified it a little as the steering clumn bracket is chrome and I want to see it as well. (http://i938.photobucket.com/albums/ad228/craigrdennis/IMG_1496.jpg) Have fitted the bonnet now to start on the front guard alignment. (http://i938.photobucket.com/albums/ad228/craigrdennis/IMG_1502.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/IMG_1503.jpg) Will post again soon. Still trying tsort through those damn wires. Slowly getting rid of them. Regards Craig D Title: Re: Here we go again!!! Post by: DN2168 on May 23, 2012, 07:50:07 AM Hi Craig,
That wiring would give you nightmares, bet you'll never look at a bowl of spaghetti the same way again ;D. On a more serious note, the FC is looking really nice. You must be happy with the progress. Dean. Title: Re: Here we go again!!! Post by: jack_fc on May 23, 2012, 09:45:54 AM Craig, those gauges look very 8) 8), and so does the rest of your project - very impressive! Good luck with the 'spaghetti'... Title: Re: Here we go again!!! Post by: Old_Mt_Isa_Boy on May 25, 2012, 07:09:59 PM Well mate that is looking cool.
I do like the colour. Hope you get your way through those wires. Regards Wayne b Title: Re: Here we go again!!! Post by: FCV08 on June 10, 2012, 05:32:05 PM JB
Finally had a crack at getting a video done. So here it is but not real long and had to jump the fuel pump relay to get it started. My daughter got it on her iphone but came in at 93MB. I have reduced it down to around 13MB. (http://i938.photobucket.com/albums/ad228/craigrdennis/th_StartingmyFC.jpg) ($2) Will do better once I work out how to upload a little smaller file. Cheers Craig Title: Re: Here we go again!!! Post by: FCRB26 on June 10, 2012, 05:56:31 PM Sounds Phatt as gotta be happy with that one step closer.
Pete Title: Re: Here we go again!!! Post by: Old_Mt_Isa_Boy on June 10, 2012, 06:35:31 PM It does sound great. You have got to be getting excited.
Regards Wayne b Title: Re: Here we go again!!! Post by: JB on June 10, 2012, 07:39:27 PM ;D ;D ;D I recognize that sound!!! It's awesome!!!
How do we get rid of the crackle when you back off? Just an electronic tune up? Haven't worked this one out yet. Cheers JB Title: Re: Here we go again!!! Post by: FCRB26 on June 10, 2012, 08:33:19 PM Exhaust to give,it a but of back pressure would stop the crackle wouldn't it.
Title: Re: Here we go again!!! Post by: FCV08 on July 29, 2012, 09:31:31 PM Trying for a bloody hour to upload some photos
Here they are Engine nearly done (http://i938.photobucket.com/albums/ad228/craigrdennis/IMG_1523.jpg) That wiring nearly finished (http://i938.photobucket.com/albums/ad228/craigrdennis/IMG_1528.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/IMG_1527.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/IMG_1526.jpg) Handbrake setup (hazard switch Thanks Brett ;) ) (http://i938.photobucket.com/albums/ad228/craigrdennis/IMG_1521.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/IMG_1515.jpg) Front Speakers (http://i938.photobucket.com/albums/ad228/craigrdennis/IMG_1533.jpg) Have a great week everyone' Cheers Craig D Title: Re: Here we go again!!! Post by: zulu on July 29, 2012, 10:43:21 PM It's looking great Craig I like the Wilsonia gauge and the way you have re purposed the old Fuel guage location to keep the original look Not to mention the under dash gauge carrier and the speakers, very clever Gary Title: Re: Here we go again!!! Post by: Stash on July 29, 2012, 11:07:15 PM Lookin good Craig
Title: Re: Here we go again!!! Post by: FCV08 on July 30, 2012, 10:44:30 PM Thanks Gary & John
I think I would prefer the wiring to trying to add photos to the post. Hopefully the mandatory run around the block will not be to far away Thanks for the kind words Cheers Craig D Title: Re: Here we go again!!! Post by: NES304 on August 26, 2012, 07:03:58 PM Can you register it with a pod filter?
Title: Re: Here we go again!!! Post by: NES304 on August 26, 2012, 07:14:48 PM Thanks Gary & John Stupid red wine..... i ll drunkenly accept my invite to the 304 club!I think I would prefer the wiring to trying to add photos to the post. Hopefully the mandatory run around the block will not be to far away Thanks for the kind words Cheers Craig D Now how to I get to Toowoomba to steal those extractors! Title: Re: Here we go again!!! Post by: Old_Mt_Isa_Boy on August 26, 2012, 07:36:55 PM Craig it does look fantastic. Bretts little trick with the hazard light is one of my favourites - next to the headlight speaker inserts.
Did you do anything with the generator gauge on the wilsonia? Regards Wayne b Title: Re: Here we go again!!! Post by: FCV08 on August 27, 2012, 10:00:01 PM Wayne
I have not ewired it up as not sure with running the 85amp Alternator whether there will be any damage. The temp light is actually my charge light but well keep that a secret ;D ;D I chose the mixing bowls as they were easier to come by for the speakers. Hopefully up town next week to get the full exhaust fitted. Cheers Craig Title: Re: Here we go again!!! Post by: FCV08 on August 27, 2012, 10:49:14 PM NES
Things do look different through rose coloured beer goggles :D :D :D :D You have finally seen the light. ;D ;D ;D You won't be dissappointed. I will keep chasing to see whether there is someone who can make a set of those extractors. It is a shame Rod gave it away. He is a Manual Arts Teacher now. I do know that you need a high torque starter motor as it is smaller and allows for a neater fit on the pax side. All the best Craig D Title: Re: Here we go again!!! Post by: NES304 on August 28, 2012, 08:42:28 PM Thanks mate
Title: Re: Here we go again!!! Post by: pedro on August 30, 2012, 02:23:52 PM Looks and sounds sweet Craig, looks like it's going to be between you and Wayne to be second finished now Jamie has his old girl on the road.
Pedro Title: Re: Here we go again!!! Post by: Old_Mt_Isa_Boy on August 31, 2012, 07:30:26 PM Craigs is bloody close. If I finish in time for our driving holIday will have to call in and say Hi
Rgds Wayne B Title: Re: Here we go again!!! Post by: FCV08 on August 31, 2012, 11:57:43 PM Wayne
Love to be second but I think you may be a little futher on. Feel free to call in whenever. Cheers Craig D Title: Re: Here we go again!!! Post by: FCV08 on September 16, 2012, 11:20:13 PM Off to get the exhaust fitted tomorrow.
Then back home to put the remainder back together. (http://i938.photobucket.com/albums/ad228/craigrdennis/th_IMG_0364.jpg) ($2) (http://i938.photobucket.com/albums/ad228/craigrdennis/IMG_0363.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/IMG_0361.jpg) Til next time Cheers Craig D Title: Re: Here we go again!!! Post by: FCRB26 on September 17, 2012, 03:10:44 AM Looking great
Looks a little evil with the grille bits off. The excitement of driving her must be a great feeling. Well done. Pete Title: Re: Here we go again!!! Post by: FCV08 on September 18, 2012, 09:47:12 AM Exhaust on.
Now on the home stretch ;) ;) ;) Cheers Craig Title: Re: Here we go again!!! Post by: TTV6FC on September 18, 2012, 09:58:43 PM Love it!!Looks and sounds real sweet.Well done,good luck with getting it finished.Jamie.
Title: Re: Here we go again!!! Post by: Old_Mt_Isa_Boy on September 22, 2012, 06:30:06 AM Thats big progress Craig. Starting to smell the end.
Regards Wayne b Title: Re: Here we go again!!! Post by: FCV08 on October 22, 2012, 10:10:58 PM Well trial fitted the new seat brackets and couldn't resist taking it for a quick squirt around the block. ;D ;D ;D
Feels good on the road and sounds even better. :D :D :D :D Fitting the resomat and then sorting out the console. Hoepfully on the road before Christmas R Craig D Title: Re: Here we go again!!! Post by: fcwrangler on October 22, 2012, 10:31:16 PM Craig, it's great to see your nearing the end, the car looks great, must feel good to be able to take it out for a short run.
All the best Jim Title: Re: Here we go again!!! Post by: FCV08 on December 12, 2012, 11:35:07 PM Coming together now.
Although still trying to get the wheel combinations right. Are all the tyre a wheel places the same? The thou have dealt with so far don't seem to want my money(http://img.tapatalk.com/d/12/12/12/vyvuvuza.jpg) (http://img.tapatalk.com/d/12/12/12/evytatyb.jpg) (http://img.tapatalk.com/d/12/12/12/ezebygu8.jpg) (http://img.tapatalk.com/d/12/12/12/py3u2yva.jpg) Till next time Title: Re: Here we go again!!! Post by: FCV08 on December 12, 2012, 11:39:03 PM Here is an update
Seats in (http://img.tapatalk.com/d/12/12/12/7a6abequ.jpg) Bling on (http://img.tapatalk.com/d/12/12/12/pyqehy3u.jpg) Front coming together (http://img.tapatalk.com/d/12/12/12/vu5a7e6e.jpg) Title: Re: Here we go again!!! Post by: FCV08 on December 12, 2012, 11:41:09 PM Trying to use Tapatalk App and somehow duplicated the post
Cheers Craig Title: Re: Here we go again!!! Post by: FCV08 on February 17, 2013, 08:04:49 PM Here is my update
Fitted my new rims. Billet Specialties, they look alright to me. (http://img.tapatalk.com/d/13/02/17/pe6eje2a.jpg) (http://img.tapatalk.com/d/13/02/17/9asu2a2u.jpg) (http://img.tapatalk.com/d/13/02/17/u6epuryq.jpg) (http://img.tapatalk.com/d/13/02/17/yryse3at.jpg) (http://img.tapatalk.com/d/13/02/17/5ujy3yma.jpg) Have nearly finished the interior. Just the console and a few minor things. Finished the kick panels (http://img.tapatalk.com/d/13/02/17/6a6yvu2y.jpg) Hopefully not long before I get it on the road. Can't seem to get a decent run at it lately as I have been repairing my daughters car after being in a bungle and now my son's car has had the motor overheat and seize up. Until next time!!! :) Cheers Craig D Title: Re: Here we go again!!! Post by: Not Happy Jan on February 17, 2013, 08:36:23 PM Wow Craig. Shoes look sensational. ;)
What size are they?? It's coming together very nicely! Nick Title: Re: Here we go again!!! Post by: NES304 on February 17, 2013, 08:43:37 PM Bloody beautiful mate
Title: Re: Here we go again!!! Post by: FCV08 on February 17, 2013, 09:24:56 PM Thanks Nick and NES
Nick the wheels are Billet Spec. Chicaynes. Specs as follows: - Fronts are 15 x 7 (4.625in. BS) running 205 60s - Rears are 15x 7 (3.75 in. BS) running 215 60s I spent bloody ages tracking these down and ended up buying in direct from the US. I had them drilled to the Commodore PCD of 120mm as well. It took 4 weeks from ordering to delivery to Toowoomba. Could not recommend Billet Specialties enough as they were very helpful. They have some other styles as well that will suit the older cars. Must warn everyone though they can get a bit expensive but I am very happy with the end result. Cheers Craig D Title: Re: Here we go again!!! Post by: TTV6FC on February 17, 2013, 09:29:58 PM Looks fantastic Craig,feels good to be this close but is a bit frustrating when everything else gets in the way... ??? ;) Jamie.
Title: Re: Here we go again!!! Post by: FCV08 on February 17, 2013, 09:33:01 PM Thanks Jamie
BTW I do intend to drop the front about 40mm once the car is through all the legalities of rego. ;) ;) ;) ;) Craig D Title: Re: Here we go again!!! Post by: Stewy on February 17, 2013, 09:33:39 PM Looking really nice Craig :)
I have always liked nice shiny wheels on a white car keep up the good work. Cheers Stewy 8) Title: Re: Here we go again!!! Post by: VAN059 on February 21, 2013, 09:08:09 AM very nice shoes Craig 8)
Title: Re: Here we go again!!! Post by: FCV08 on April 06, 2013, 09:20:58 AM Thanks to Pete the front number plates sits just nice (http://img.tapatalk.com/d/13/04/06/gehuhedu.jpg)
(http://img.tapatalk.com/d/13/04/06/9a5ypa6y.jpg) (http://img.tapatalk.com/d/13/04/06/eteby3ev.jpg) (http://img.tapatalk.com/d/13/04/06/vutyqe2u.jpg) Now waiting for an appointment with my engineer. Regards Craig Title: Re: Here we go again!!! Post by: Old_Mt_Isa_Boy on April 06, 2013, 09:25:34 AM Sounds like only days away. Great stuiff.
Regards Wayne b Title: Re: Re: Here we go again!!! Post by: DN2168 on April 06, 2013, 09:59:04 AM The wheels look really nice Craig, hope you can get a good run at the car & get it finished soon.
Title: Re: Here we go again!!! Post by: FCV08 on April 29, 2013, 08:29:33 PM Engineer called last night to look over the car.
Called him today and all I seems fine. ;) ;) :D Paperwork in the just around the corner then off to get the rego done. Getting a little anxious or is that excited!! ;D ;D ;D Cheers Craig Title: Re: Here we go again!!! Post by: JB on April 30, 2013, 05:25:04 AM ;D ;D ;D
Awesome!!! Title: Re: Here we go again!!! Post by: Ol_Girl_58 on April 30, 2013, 07:19:50 AM Hey Craig,
Looks cool! Is the engineer okay with you running bucket seats without headrests? Cheers, Josh Title: Re: Here we go again!!! Post by: sexyfc on May 02, 2013, 06:33:31 PM Thats an awsome bit of work there.. Im excited for you!!! Job well done
Title: Re: Here we go again!!! Post by: pedro on May 04, 2013, 08:28:19 AM How did you go with the engineer Craig, got your rego yet?
Pedro Title: Re: Here we go again!!! Post by: FCV08 on May 07, 2013, 03:05:38 PM To all
Car is engineered and registered as at 2.00pm today. ;D ;D ;D :D : What a fantastic feeling. To all those who are still on their build keep going as this feeling of being able to jump in and take it for a spin whenever you want is fantastic. I deregistered it back in 2002 and finally back on the road today. I guess my post now gets moved!!! Good luck to you all Regards Craig D Title: Re: Here we go again!!! Post by: pedro on May 07, 2013, 03:11:42 PM Congratulations Craig 8) 8), you must be on a pretty good high right now, I still reckon we need a green one of those emoticons for jealousy.
Pedro Title: Re: Here we go again!!! Post by: brett_f on May 07, 2013, 03:22:10 PM Congratulations Craig, I know how your feeling right now. Only disappointment was when i got moved to the completed vehicle section. Just didnt feel right. Enjoy.
Brett Title: Re: Here we go again!!! Post by: FCV08 on May 07, 2013, 05:13:13 PM (http://img.tapatalk.com/d/13/05/07/6adegy7y.jpg)
(http://img.tapatalk.com/d/13/05/07/anuse8a3.jpg) (http://img.tapatalk.com/d/13/05/07/uvy6yru2.jpg) (http://img.tapatalk.com/d/13/05/07/erytyqus.jpg) Finally Title: Re: Here we go again!!! Post by: jack_fc on May 07, 2013, 06:14:17 PM Well done, Craig! Car looks great!! (love the interior 8)) Now... ENJOY :) cheers, jack Title: Re: Here we go again!!! Post by: FCRB26 on May 07, 2013, 06:26:38 PM Looks unreal.
Jeez they are a big number plate in QLD it would of ripped of cos of wind resistance without the bracket... Enjoy driving her.. Pete Title: Re: Here we go again!!! Post by: Old_Mt_Isa_Boy on May 07, 2013, 07:07:13 PM Well done Craig. Great news and hope you can enjoy every minute of it.
Regards Wayne b Title: Re: Here we go again!!! Post by: JB on May 07, 2013, 07:11:27 PM Fantastic final build pics mate!!!
You know the rest of us are jealous! Many miles of cruising ahead. Enjoy!! ;D Cheers, JB Title: Re: Here we go again!!! Post by: FCV08 on May 07, 2013, 07:15:55 PM Geez JB didn't take you long.
Just cracked the top off one and I'm outa there(http://img.tapatalk.com/d/13/05/07/8yzuzyny.jpg) Title: Re: Here we go again!!! Post by: NES304 on May 07, 2013, 07:28:00 PM Looks really good mate
Best looking car in the car park by far Title: Re: Here we go again!!! Post by: FCV08 on May 07, 2013, 07:45:00 PM Thanks to all who have made such positive comments.
I would also like to thank the many who have indirectly contributed to me reaching this fantasticlmilestone. Inspiration Pedro, for giving me a clearer outlook on life Knowledge JB - your build however long it has taken, gave me the drive to keep going along with some great ideas Brett - your many posts on the technical aspects I.e. wiring the wiper switch etc. Jack - you know, those damn seats ;) Ken - your knowledge and never ending source of spare parts Pete - your skill, expertise, generosity and willingness to take things to a new level with you build NES - your ability to keep taking pete's insults :D :D and humouring us all And finally to all those who contribute to this forum whether it be in humour or technical advice. I look forward to meeting some of you at some stage in the future, hopefully in Tassie, or somewhere up the east coast. Anybody heading through Toowoomba please PM me BTW I have had three requests for school formats just today. Not sure whether that is a good thing or not Cheers Craig D Title: Re: Here we go again!!! Post by: jack_fc on May 07, 2013, 08:27:34 PM Craig - you're welcome, mate; it's an honour to have had some (very) small input into such a fantastic build... :) Title: Re: Here we go again!!! Post by: TTV6FC on May 07, 2013, 08:58:18 PM Well done Craig,car looks fantastic and yes it is an amazing feeling to finally have your car back on the road after such a long time off it.It is quite surreal to drive it for the first time after only seeing it parked in the shed.Have fun with it now and enjoy all the comments you get from others.Cheers,Jamie.
Title: Re: Here we go again!!! Post by: KFH on May 08, 2013, 08:41:59 AM Craig. Congratulations on getting it finished. Good to see it back on the road again. I hope to see it in the flesh soon.
Keith Title: Re: Here we go again!!! Post by: pedro on May 08, 2013, 06:07:28 PM Thanks Craig, I feel honoured and slightly surprised and overwhelmed by your comment, it's taken me a while to answer as i didn't know what to say, I'm nothing special just an average bloke doing what he has to do to get by each day, some days i get through pretty well distracting my mind by working on my wagon or doing stuff with friends and family and some days i just fall to pieces dwelling on the past too much, anyway congrats on getting your car finished and thanks you made me feel better about life at the moment :) :)
Pedro Title: Re: Here we go again!!! Post by: brett_f on May 08, 2013, 07:15:35 PM Craig, The same as pedro. You created your own piece of history and yes you might have used some ideas from others but that doesnt mean your car isnt unique. Feel proud mate as even though some of us didnt use others ideas, it certainly prompted us along the way.
Regards brett Title: Re: Here we go again!!! Post by: Gordon on May 10, 2013, 10:47:14 AM Craig great car mate ,anyone who finishes one of these projects should be commended,staying committed to finishing it over years with budget restraints and so on is a great achievement
Gordon Title: Re: Here we go again!!! Post by: fink on May 19, 2013, 09:24:38 PM Well done Craig,it's good see another finished and''well built'' project,the all white dash looks mad,it's those simple things that stand out,congrats.
PS.I have a squiz on other forums now n then and from what i've seen on here[this forum]the fabrication skills and thought that have been shown,are up there with the best! Gaz! 8) Title: Re: Here we go again!!! Post by: fe350chev on June 05, 2013, 01:01:20 AM I haven't commented because I lost this thread when I went into the wilderness with my new house build and my 2 car builds. But I must say, the last few days I have been using your car and Jamie's build and others, Mt Isa Boy and Pete's etc, as inspiration to really get going again, despite not having my new shed up. There is always something you can plan, research, sort or clean up because it all adds up, in the end, to getting closer to the finish :P. There is something about your car that is drawing me to it. It's one of the most photogenic FC's I have seen. You must be really enjoying it. 8)
Title: Re: Here we go again!!! Post by: FCV08 on January 03, 2014, 11:28:37 PM Here is a couple of updated photos
The first one is thanks to some professional photographer at the Toowoomba All Holden Day. You will see Keith's (KFH) in the background. (http://i938.photobucket.com/albums/ad228/craigrdennis/image-1.jpg) (http://i938.photobucket.com/albums/ad228/craigrdennis/image.jpg) See you in Tassie Cheers Craig D Title: Re: Here we go again!!! Post by: FCV08 on March 25, 2014, 08:41:27 PM Just working through a console option. Trying to accommodate most things. Need drink holders somewhere for the mobile and somewhere to charge things. Will post an update when it is finished (http://img.tapatalk.com/d/14/03/25/3udehypa.jpg)(http://img.tapatalk.com/d/14/03/25/anegaram.jpg)(http://img.tapatalk.com/d/14/03/25/y9eqaqy2.jpg)
Title: Re: Here we go again!!! Post by: FCRB26 on March 25, 2014, 09:27:04 PM ;D KQQL
Title: Re: Here we go again!!! Post by: FCV08 on April 08, 2014, 01:22:50 PM Here is the finished product. (http://img.tapatalk.com/d/14/04/08/ybu5ahyt.jpg)(http://img.tapatalk.com/d/14/04/08/edenaty5.jpg)
Regards Craig Sent from my iPhone using Tapatalk Title: Re: Here we go again!!! Post by: ridgey_didge on April 08, 2014, 04:40:17 PM Wow - that looks great.
But please, take that key ring off the keys before it chips the paintwork on your dash! Cheers David Title: Re: Here we go again!!! Post by: Sheriff on April 08, 2014, 05:00:34 PM Looks good Craig...well done....Mike.
Title: Re: Here we go again!!! Post by: JB on April 08, 2014, 06:07:11 PM That does look really neat!! Want to make mine lol
Title: Re: Here we go again!!! Post by: jack_fc on April 08, 2014, 08:10:39 PM Beautiful :) 8) well done mate! Title: Re: Here we go again!!! Post by: FCV08 on April 09, 2014, 09:48:40 PM Thanks for the great comments guys.
JB I would probably have a crack with Ply and MDF next time a little easier to shape. I did like working with the metal though. Cheers Craig Title: Re: Post by: fe350chev on December 01, 2014, 09:37:08 AM Great work Craig. It's amazing how these old girls can be made to look so different. I really like some of the creamy off- white colours, especially the utes. The car looks awesome.
Cheers Deano. Title: Re: Here we go again!!! Post by: Luke Healey on October 22, 2017, 08:39:34 PM Just finished reading the whole post. Got some great ideas for mine.
Thank you Craig. And thank you to anyone who goes to this kind of effort in there posts. I have read many.. Sent from my SM-G900I using Tapatalk Title: Re: Here we go again!!! Post by: VAN059 on October 23, 2017, 08:36:55 PM Awesome console Craig, the best flattery is imitation & I'm sure this will be copied quite a few times. Also I think the best job is if it looks like it came original, that's got it in spades!
|