FE-FC Holden Discussion Forum

These kits are a new reproduction rear body to bumper seal, part numbers 7411557 and 7411558. The seals are injection-moulded, so one piece, not fabricated and glued together.

(http://i657.photobucket.com/albums/uu293/fefcforum/RearBumperSeals/DSCF3482_s.jpg)

(http://i657.photobucket.com/albums/uu293/fefcforum/RearBumperSeals/DSCF3479_s.jpg)

(http://i657.photobucket.com/albums/uu293/fefcforum/RearBumperSeals/DSCF3478_s.jpg)

Price: $45 + $6 (regular postage). Contact me ($2) to place an order, or NSW Club members can grab a set at a meeting.

Thanks for all the PM's.

Cheers
John

Some photos of the seals fitted to John's car:

(http://i657.photobucket.com/albums/uu293/fefcforum/RearBumperSeals/Picture001_s.jpg)
(http://i657.photobucket.com/albums/uu293/fefcforum/RearBumperSeals/Picture002_s.jpg)
(http://i657.photobucket.com/albums/uu293/fefcforum/RearBumperSeals/Picture003_s.jpg)
(http://i657.photobucket.com/albums/uu293/fefcforum/RearBumperSeals/Picture004_s.jpg)

These kits are a new reproduction rear body to bumper seal, part numbers 7411557 and 7411558.

The seals are injection moulded, so one piece, not fabricated and glued together.

The kits are manufactured locally here in Sydney, they are not imported.

I will have some sets available in Orange.

Cheers
John

I still have a few sets of these rubber kits available.

Cheers
John

I still have a few sets of these rubber kits available.

Cheers
John

Look great PM me some bank details ill take a set...



Pete

Hi John
Ill take a set too. PM me too for details.
Nick

I will grab a set as well, same mate can you PM me the details so I can get some money to you.

Cheers
JB

Thanks for all the replies I have received over night, I must advise that the price per set of 2 is now $50.00 plus postage of $6.00 plus $3.00 for registration. 

Sorry for not advising earlier.

Thanks & regards
John

It must be the post christmas sale rush, they look great.
I would like a set also thanks, PM me with bank details.
Happy New Year and cheers Stewy.

Look great PM me some bank details ill take a set...

Pete

You have PM

Cheers
john

Hi John, received seals today they look absolutely fantastic :)
You have also done a fantastic job on the gear lever knob a great reproduction.
Glad we have some people with the skills still willing to keep our passions up to great standard.
Thanks again

Kind Regards
Stewy

Stewy,

Thank you for your kind words.

Cheers
John

Thanks Maco,

Can agree with Stewy!! Thank you for a great effort.

Cheers
JB

Very impressed with the quality look awesome thanks.


Pete

Thank you for your kind comments.

Cheers
John

Hi John
Thanks for the seals. They look awesome. Can't wait to fit them :P
Nick

I'll second that - mine arrived in the mail last week. Thanks Maco  ;)

Cheers,

Josh

This might sound like a stupid question, but what do they actually do ? clearly they must stop dust or water coming through, but are they a real need ? what happens if i dont have them ? as my FE doesnt have a set (under construction), what is the big draw car ( advantage ) of having these behind my bumper ?

also are there any other behind the scene rubbers that are a Big Need to have on the car ??

thankx

FE 4 ME

Just stops the mud flying off the rear wheels of your high powered fe fc and filling up your bumper bar and around that area and rusting it out.

correct me if im wrong.

When you drive on slushy wet roads they stop the slush from splashing up onto the rear body of the car.

Ken

Thanks Ken & Pete for your replys.

Cheers
John

Bump

  Hi  John   Rubber parts arrived today very impressed with them,  Thanks again   Roy

I have another batch of these Rubbers in stock now, this will be the last batch I will be manufacturing.

They are $50.00 a set, plus postage.

Cheers
John

Hi John
I would like a set of rubbers. Pm sent

Fcrob

John, I'll grab another set for the other project.
Thanks Jim

Hi Jim,

I will have some at the next club meeting.

Cheers
John

Hi John,

Rubbers arrived today excellent work. Many thanks,

Rob   

Hi John,

Do you have any rubbers?

k00lcar

Hi k00lcar,

You have a PM.

John

Hi Maco, Do you still have any of these available? Regards, Martyn

PS Long time viewer, first time poster. Hope I did everything right. :)

John are these complementary if I buy you a beer or Two or Three  :D :D :D :D :D :D..........FC427..........

Hi Martyn,

I have some sets available, I can send you a PM with my bank details if you wish to purchase a set or two.

Yes you did everything right, I hope we see a lot more of you on the forum.

Cheers
John

Hi Mark,

Talk to me, too many beers then I can't drive home.

John

Hi John, I'd appreciate that, thank you.
I'll start sticking up a few posts on an FC I'm building. I did a VP wiper installation based on Brett's that I think some would find handy. Have been blown away with how much useful info is available in the forum. Time i gave something back I reckon...
Regards, Martyn
Regards, Martyn

Hi Martyn,

I have sent you a PM.

Cheers
John

Hi John, Thought I replied via PM but can't see a record of it after pressing send. If not received let me know and I'll have another go. Thanks, Martyn

Hey Martyn,welcome to the forum.When you send a PM you have to tick the little box to save it. ;)

Hi John, inserts received, stoked with the product. Thanks very much.

TTV6,  Thanks for your previous post.  :)

Martyn

Hi Martyn,

Have you just recently received them?

John

Hi John, no, was sick for a while and only got to the post office on the weekend. They would have been there for a while.

Regards, Martyn

Hi Martyn,

Hope you are feeling better.

John

Yeah mate, all good now thanks! No excuse for not working on the car now...
Have a bit more tidying up to do and will post  some pics of my Commodore wiper conversion (after learning how to post pics). Will also then put some on members build forum.

Have stock if any one is after soon.

Cheers
John

Still the same price John?

Still the same price $50.00 a pair plus $13.50 registered post.

John

Hi John
Am after a set can you post to NZ ? If so please advise & Thanks
Paul

Hi John

i would also like a set if available posted to Adelaide, please PM payment info and i will transfer funds

cheers Phil  ;D

John,

If you have any left I'd like to purchase a set too please.

Is the price still current - $50.00 + $13.50.
Are the bank details used for the gauge mounts OK.

Dave.

Hi Dave,

Yes the account details are still the same.

Can you please advise your postal address when you have transferred the funds.

Cheers
John

Hi Paul,

You have a PM.

Cheers
John

Hi Phil,

You have a PM.

Cheers
John

PM sent John, thanks.

G'day John,

If you have a set left, please add me to the list.  PM your bank details, etc for payment and the amount to  :)

Cheers,
Graeme

I will be taking some Rear Body to Bumper Seals to the Nats arriving on Wednesday 16/4 in Hobart.

Cheers
John

Hi John,

Will your gauge mount take a 2 5/8 inch gauge ?

If so I'd like a 2 gauge metal one and a set of these seals please. I'm not going to the nationals. After that would be fine.

Regards,

Mark

Hi Mark,

Sorry the mounts only take 2" diameter gauges.

I will pm you with my bank details, I will send the seals when I return from Tassie.

Cheers
John

Have stock if any one is after a set.

Cheers
John

Hello,
         I'd like a set please?

Regards, Wasim (Tony)

Hi Tony,

You have a PM.
Cheers
John

hi there,
if you have any sets left I would like one please.

Hi, you have a PM.
Cheers
John

Hi John, I was wondering if these would fit my FB sedan ?
Cheers Rob

John i need another set for my ute can you PM me details

Hi Pete,
You have a PM.
Cheers
John

Would like a pair for my EK van please John. Please advise if available and pm cost and eft details.
Cheers
Clay


Sent from my iPhone using Tapatalk

Hi Clay,
I am not sure if they fit  an EK van, maybe someone can check there parts book, thanks in advance.
Cheers
John

Hi john
From the photos they are identical. I have an original pair which are a bit withered. The commercials are the same fe to EK.
Cheers clay


Sent from my iPhone using Tapatalk

Hi Errol,
I have sent your a PM.
Cheers
John

FE/FC sedans and wagons # LH 7411557 #RH 7411558

FB/EK sedans and wagons # LH 7412789  #RH 7412790

FE/FC, FB/EK utes and vans  #LH 7411769  #RH 7411768

So would depend how different they were if they could be modified or not.

I have a set of John's wonderful reproductions here in Adelaide if you want to check them for yourself first.

Cheers Stewy   8)

I know they fit FE, FC utes & vans.
John

G'day John,

I've been wondering whether these would fit an FB/EK too. I'm in the process of screwing together an EK wagon, and would like to give them a go. I'll take some pictures to show if they work or not.

Can you please PM me some bank details and I'll transfer some cash.

Cheers,
Harv

Thanks Stewy for the kind offer. I will take you up on it when I get back from Melbourne next week.

I seem to have thrown the cat amongst the pigeons here. Don't mind stimulating a bit of debate now and then. My supposition that they would fit FB EK commercials is based on their lower rear quarters being pretty well identical to the FE FC ones. This doesn't apply to the sedans and wagons of course with their definitive chrome fins so good luck with that one Harv.

Thanks for the info John and I will let you know once I get back and check with Stewy. Interesting that the part numbers are different and a good point but not really surprising.

Cheers all
Clay


Sent from my iPhone using Tapatalk

Hi Harv,

Thanks for your message, I have sent you a PM.
Cheers
John

On an FB EK sedan or wagon - doesn't the rubber clip into the bottom of the tail light body?
 I think the reason for the part number change between FE FC sedan/wagon and ute/van is because of a slightly different shape where it negotiates the bumper bar bracket.
From memory the ute and van rubber is a little shorter than the sedan wagon one.

Ken

Hi Ken, thanks for your comments, yes I believe the ute & Van are a little shorter & some members have trimmed them down, I believe the pinch mounting is the same. The FB/EK Sedan is different.
Cheers
John

Yep, the mounting for EK is different, so expecting a bit of fit-and-fiddle on this one. Looks like a good product to start with though. I'll take some photos as I go.

Cheers,
Harv

Thanks Harv, Photos will be very much appreciated.

Cheers
John

Haven't forgotten this John. I'm hoping to catch up with Stewy next week to compare parts.


Sent from my iPhone using Tapatalk

Found the old one 7411768. (http://uploads.tapatalk-cdn.com/20160731/c50ac7e639ece4ac35ca0bdd0d23e47c.jpg)(http://uploads.tapatalk-cdn.com/20160731/89abeacabc2170c1af3bdd2efeea25bd.jpg)

I'm away next week so I will see if I can come and see you the following week thanks Stewy.


Sent from my iPhone using Tapatalk

I'm away next week so I will see if I can come and see you the following week thanks Stewy.


Sent from my iPhone using Tapatalk
[/quote]
No worries, just send me a text.  :)

Cheers Stewy   8)

Thanks to Stewy for letting me compare the rear body to bumper rubbers from my EK van. They definitely appear to be interchangeable with the FE FC items provided by Maco. Just a bit on the end of the repros which can be trimmed off to accomodate the bumperettes on the van. Would definitely like to order a pair John. I will pm you.

Thanks also Stewy for showing me your cars and the chat.

Cheers
Clay


Sent from my iPhone using Tapatalk

Hi Clay,
Thanks for the info regarding the fitment. I have sent you a PM.
Cheers
John

(http://uploads.tapatalk-cdn.com/20160817/a9f2662a359b4716f047e202dafb09fe.jpg)
Meant to post this photo of the old van rubbers next to the new reproductions


Sent from my iPhone using Tapatalk

Glad to be of service Clay, sorry that you couldn't shut me up.  ;D
Just love my cars.
Catch up anytime.

Cheers Stewy   8)

Happy to talk earlies and relish the opportunity to check out people's cars Stewy.


Sent from my iPhone using Tapatalk

Did you see my pm John?


Sent from my iPhone using Tapatalk

Hi Clay,

I have sent you a PM.
Cheers
John

 I still have a few sets of Rear body to bumper seal available.
Cheers
John

Have a few sets available atm.

I will be taking a few sets to the Nationals in Canberra.
Cheers
John

I checked John's rubbers against my FB/EK wagon, and sadly they are too far different to be used (can't be cut-and-shut as the dimensions are different).

However, I also checked the rubbers against my FB/EK ute, and they are a beautiful fit. A very small amount of tirmming is needed, but otherwise perfect.

Cheers,
Harv

Thanks for the information Harv, much appreciated.
Cheers
John

Some reverse-engineering work in the MasterParts manual says that your seals fit:
a) FE/FC sedans and wagons without trimming, and
b) FE/FC/FB/EK utes and vans with minor trimming (they share the same rubber).

Will not fit FB/EK sedans and wagons (who share a different rubber).

Cheers,
Harv

Hi Maco
Have sent you a pm regarding rear body to bumper seals.
 Cheers Rob [RIP]

Hi John

Are you still making the bumper seals?
Helen

Hi Helen,

Yes I do have some stock, I will send you a PM.
Cheers
John

Hi there John
Any of these seals still available?

Hi KJ, yes I do have some available they are $100.00 are

Hi KJ,

Yes the Rear Body to Bumper Seals are available, $100.00 including postage.

Cheers
John

Hi John, if still available may i please have a set of the seals. Pls advise payment details accordingly thank you Norman

Hi mate, yes I do have a set available, I have sent you a PM. Cheers John

 Hi John
          Can I still get a set of them rubbers  ?
                      Thanks Brad.

Hi Brad,

Yes the Rear Body to Bumper Seals are available, $100.00 including postage.

Cheers
John

  Hi John
                They arrived yesterday in the mail. 
        Thanks Brad.

Thanks Brad