FE-FC Holden Discussion Forum

Gidday all,Just giving you all a look at my starting point for the next phase of my life. Kids nearly out on their own.
Just a little background on where it all started. In 1987 purchased the FC Special for $200 in Toowoomba QLD. Original colour two tone green (Someone pleease advise me of the correct name of the colours). Drove it back home (300 meters down the road) and started to strip in down. Being in the RAAF at the time there was only a small garden shed and a carport available in the married quarter provided. All parts removed and body sandblasted and returned to home. Then the tedious but fulfilling task of putting it all back together with the new colour being a Toyota White (Eeeeek). This time around all was standard except for the imitation dragways fitted plus a floor shift. After being posted to Sydney in 1991 I then embarked on fitting a red motor, Aussie 4 speed, HR diff., plus all the required compliance accessories i.e. HR front etc. Also redid the engine bay to hide wiring and fit brake booster, EH column and KB laser bucket seats. In 1999 returned to Toowoomba and the car has basically sat in the shed since. Now looking to upgrade again to a V8 from a VN Commodore plus all the required drivetrain. So now the journey begins.
Can someone explain to me the gauge setup I have and also where I can get all the writing redone i.e. OIL, TEMP, GEN. Here are as few photos of how it is now. The engine bay leaves an little to be desired so don't be too tough.
Cheers Craig

(http://i884.photobucket.com/albums/ac49/WhiteFC/PICT0574.jpg)
(http://i884.photobucket.com/albums/ac49/WhiteFC/PICT0572.jpg)
(http://i884.photobucket.com/albums/ac49/WhiteFC/PICT0573.jpg)
(http://i884.photobucket.com/albums/ac49/WhiteFC/PICT0581.jpg)
(http://i884.photobucket.com/albums/ac49/WhiteFC/PICT0577.jpg)
(http://i884.photobucket.com/albums/ac49/WhiteFC/PICT0585.jpg)
(http://i884.photobucket.com/albums/ac49/WhiteFC/PICT0583.jpg)

Hi Craig and welcome to the forum

First things first - You WANT the gauge set up you have!  You do NOT WANT to go back to the original set up! Do a search on "Wilsonia" and you'll start to understand where it is a period after market gauge! Do NOT be conned by anyone who says they will swap you an original one for the one you have!  ;D Not that I truly believe anyone on here would do that though!  :D  A few of them would probably also like those fin extensions and that grille badge you've got too!  ;) 

There is plenty of information on here that will help you with your future plans for it.  And good luck with the next phase of your life that includes being re-acquainted your beloved FC.  :)

Kathi

Guage relettering is tricky - Phil in Newcastle did a run of repro glasses but I am pretty sure they are all gone now. I would get a sign writer to make up a decal for you to stick on. As Kathi says - plenty of photos available for you to print and show to a sign writer.
Please post your cars ID plate numbers and chassis number and I can tell you the original colours - there was more than 1 combination of greens

Ken

Hey Craig I'll swap you an original standard gauge for ............just kidding ;).Welcome to the forum.That is a great looking car as it is.Can't wait to see the rebuild. :o

great looking car as it is hope the rebuild goes well 8)

let me look around, i have 5 sticker made for my wilsonia gauges, should have 3 somewhere.

Thanks for the comments guys.

Ken

I will get the details to you. Can you also give me an idea on whether the paint scheme was different seeing this has the fin extensions?
I might chase up a signwriter here in Toowoomba to see whether it is possible for the lettering to be produced.

Just40

Keep in touch if you come up with anything.

Kathi

 I was in luck years ago when I went for a drive around the outskirts of Toowoomba and found an old FC Ute rusted out in the paddock. I knocked on the landholders door and asked if I could go and have a look at the old cars in the paddock, to which he agreed. When I got over their I saw the gauge set and grill badge and paid him $20 on the way out.

Now I realise what a bargain I got. ;D ;D ;D

As for the rest all is original as it came with the car.

Thanks again
Craig

Hi Whitefc just found this on ebay

Ebay Item #370256662110
                                           Cheers Damo58

Thanks Damo58

Still checking out the signwriters here in Toowoomba.

Cheers

Craig

For what it's worth the seller on that Ebay link is Phil from Newcastle that Ken referred to previously. I've got one of those repro lenses on my Wilsonia, they're very well done.

cheers
RET

Thanks RET

Will keep an eye on it.

Cheers

Craig

Hi Craig, cant stop thinking about those fin extensions. Are they an after market accessory, original or modified? They look great and I want some! I have never seen them before. It is a very nice looking car you have Craig and wish you all the best with your future plans.
Gary C.

The fin extensions were a factory fit as far as I can tell.I have two cars with them on,one which is a two tone and one which is a single colour.It depends on the style of two tone I guess although I'm not sure why it was on the single colour car.The one thing I have noticed is that the fins with extensions are different to those without.They have slots that the extensions fit into.Cheers,Jamie.

Thanks for the kind words Gary.

As for 'where do you get the fin extensions' I have no idea. I was lucky enough to have them on the car when I purchased it

A white car out in the sun always looks good because of the glare. Body and paint will need a tidy up as there are some small rust holes are appearing in the usual places.

I just thought I would post some photos before I break it apart again.

Cheers Craig

Think the fin extensions were 1959 FC I had a N/O/S pair I sold on ebay last year for $90 from memory .......FC427......

FC427

When in Sydney back in 1991 I meet Zulu (Gary) and his first response to my car was that it was a 59 model. Asking how he knew this he said basically because of the fin extensions.

Your comment supports this theory unless otherwise proven.

Rgds
Craig

Ken

Numbers as follows:
FC 200241
Body: FC225-29008-S
Trim: 274-633
Paint: 256-2100
Insert: 253-5775

Your assistance is appreciated.

Craig

If I have it right ??? they were for when they changed the paint lines on two tone car's for 1959 ........FC427.......

All is revealed here ($2).

The trim is indeed to separate the paint colours. As far as the question about why they're on a single-tone car is concerned, the fitting holes for the trim on both the later styles of FC ("C" pillar trim, fin extension) are part of the panel pressing for a Special. It's the same with the strip below the tail-lights - even the initial release single-tone FC Specials have that.

cheers
RET

RET

Thanks for this info it is exactly what I was after as it gives me the original paint scheme. I am considering another colour along with the white in this rebuild.

Cheers

Craig

Hi Craig,
 I'm a signwriter in Ipswich area, doing up a FB Van, if i can help let me know, I have done infill work for a bloke over at Greenbank area on his FC badges.

Regards
fbman 63

Thanks fbman

Still a littel way off yet but can you PM your contact details.

Thanks

Craig