FE-FC Holden Discussion Forum

Technical Board => Modification Help => Topic started by: merce36 on July 03, 2009, 11:10:44 PM



Title: v6super charged
Post by: merce36 on July 03, 2009, 11:10:44 PM
Hi I have a v6 super charged motor and turbo 700 out of a vx comodore (complete)I am hopeing to put in my fc ute.Can any body help me with any info with any do's and dont's?I was told by a auto elec that it will be easier to use an auto trans out of an old vn.IS THIS RIGHT?i Have a crs frontend.Does the sump have to be changed?Any information would be apriciated.Cheers John


Title: Re: v6super charged
Post by: FC427 on July 04, 2009, 09:59:55 AM
I have just about finished a VT and T700 into a HT Van I got the sump and pickup from Pat Gardiner V6 conversions and he was very helpful so I also bought his wiring harness for the conversion made the job a lot easer and cheaper than getting an Auto Electrician  in to do the job .....my advise would be to ring him and have a talk about any issues you have .......FC427......


Title: Re: v6super charged
Post by: ratbox on July 04, 2009, 06:47:48 PM
i'de do as FC427 says and talk to pat gardener, not sure you can use the early box with the later engine/computer though 


Title: Re: v6super charged
Post by: fcv85l on July 04, 2009, 10:37:29 PM
easier to use complete engine trans combo,just need bcm bypass from pat gardiner and use electronic speedo