|
Title: adaptor plate from grey motor to aussie 4 speed? Post by: ezzacoombs on April 22, 2009, 05:36:46 PM adaptor plate or bell housing plate from grey motor to aussie 4 speed or any gearbox which will fit n fc.
Title: Re: adaptor plate from grey motor to aussie 4 speed? Post by: EffCee on May 05, 2009, 11:26:32 PM Hi,
I asked the same question just over a year ago and got a pretty detailed response. I particularly wanted to go down that "All Holden" route and did not want to look at any other available boxes that may be far better. There are adapters from Dellow and Castlemaine Rod Shop (CRS) available, or were available some time back that enable a wide range of Japanes boxes to be fitted up, without requiring the transmission tunnel surgery to fit an Aussie 4 speed. http://fefcholden.org.au/forum/index.php/topic,12876.0.html I don't know if you wish to retain the original seat, if so then the following article may be of use to you. If you do, send Alex (Custom FC) a PM and he may be able to restore the photo's to the thread. http://fefcholden.org.au/forum/index.php/topic,750.0.html Regards Keith Title: Re: adaptor plate from grey motor to aussie 4 speed? Post by: EffCee on May 10, 2009, 12:44:22 AM This may be of help if you dont want to fit a holden gear box, still have a 4 speed and don't want the hassle of modifying the transmission tunnel. Price seems reasonable too.
Ebay Item #220410822764 The freight might be the only killer, but may be of interest to those in WA Keith |