|
Title: ignition leads Post by: Utemad on April 12, 2009, 05:28:27 PM I have been having a lot of trouble trying to find a black set of leads for my fe ??? ???. It is an original car and i dont want to put the irridescent blue ones on that the auto stores sell. Does anyone know who makes or sells original style leads? Or at least where i can find black leads. Any info would be appreciated.
Cheers Brent Title: Re: ignition leads Post by: FX1975 on April 12, 2009, 09:03:52 PM Hello, Vintage wiring harnesses make these up their no. 03 9870 0583
Hope this helps Frank Title: Re: ignition leads Post by: CraigA on April 12, 2009, 09:10:17 PM You can also try this guy.
http://www.qldignitionleads.com/ Title: Re: ignition leads Post by: Utemad on April 14, 2009, 08:57:28 AM Thanks guys. Quick replies! ;D ;D
Title: Re: ignition leads Post by: Papa Smurf on April 20, 2009, 10:45:55 AM Were they 8mm or 9mm originally
Title: Re: ignition leads Post by: Utemad on April 21, 2009, 07:51:39 AM Hi guys.
Got my leads yesterday - they look fantastic. Very happy Jan. Cheap too. ;D ;D Title: Re: ignition leads Post by: RET on April 21, 2009, 04:00:04 PM Which of the suggested suppliers did you go with? It would be good to know who you're giving the ups to.
RET Title: Re: ignition leads Post by: Utemad on April 22, 2009, 08:31:40 AM Vintage Wiring Harnesses - very quick and professional.
Title: Re: ignition leads Post by: greyone on April 23, 2009, 11:07:59 PM after reading this I ordered my leads from vwlooms $38& $6 del should be here in the morning can,t wait
regards mal Title: Re: ignition leads Post by: TTV6FC on April 24, 2009, 10:11:19 PM Careful Mal,you need a loom for an FC,not a VW.... :P
Title: Re: ignition leads Post by: Maco on April 29, 2009, 02:27:47 PM Can some one put up some photos of the leads fitted to a motor. Thanks Maco ;D Title: Re: ignition leads Post by: greyone on April 30, 2009, 08:44:38 PM maco check out the photo of the oil filter in accessories theres a good shot of the leads
regards mal Title: Re: ignition leads Post by: greyone on May 09, 2009, 11:37:23 AM got my leads coil lead was to short and #2 also to short maybe cause of the filter?
anyway I had thurs off so drove car to ringwood swapped leads around now perfect fit he also pointed out that measurements were from an fj I thought they would have been the same maybe not regards mal Title: Re: ignition leads Post by: mcl1959 on May 09, 2009, 11:51:59 AM FJ leads have right angle fittings so I'm not surprised that some leads were short. The lead would need to be maybe 20 or 30 mm longer to suit a straight fitting.
Ken Title: Re: ignition leads Post by: greyone on May 09, 2009, 09:34:07 PM well it turns out the leads that vintage wiring harneses make up are for fj not fe fc will speak to them next week and see if they will do them for fe fc,ken if you read this could you give me the length of 1,2,3,4 terminal to terminal as these are the ones they make with 90degree fittings
regards mal Title: Re: ignition leads Post by: mcl1959 on May 10, 2009, 10:18:35 AM Unfortunately I don't have a stock car here any more - I'm sure others can provide the lengths though.
Ken Title: Re: ignition leads Post by: Maco on May 10, 2009, 08:47:58 PM Any photos Cheers Maco |