FE-FC Holden Discussion Forum

For Sale and Wanted => Parts Wanted => Topic started by: coolaride on November 19, 2008, 07:36:55 PM



Title: High note horn wanted
Post by: coolaride on November 19, 2008, 07:36:55 PM
Hey

if anyone has one that they would like to sell , please let me know .

thanks

coolaride  ;)


Title: Re: High note horn wanted
Post by: brett_f on November 19, 2008, 09:30:46 PM
Coolaride,
I have a horn that i got with my FC when i bought it. It is fairly large. How do you know if it is a high note horn from appearance.
Regards Brett


Title: Re: High note horn wanted
Post by: coolaride on November 20, 2008, 04:42:04 PM
hi Brett

this is the link to the AOTW .. its kind of a mirror image of the normal horn but
sits on the drivers side .

http://fefcholden.org.au/forum/index.php/topic,8514.0.html ($2)

c-ride


Title: Re: High note horn wanted
Post by: brett_f on November 20, 2008, 06:49:56 PM
Coolaride,
The link doesn't work. The horn i have also has the original brackets still attached but i never took it off the car so i don't know what position on the vehicle it was attached to. If you are doing the western suburbs garage crawl on sunday, you can see it then. It is yours if you want it for $0. By the way it still works i tested it today.
Regards brett


Title: Re: High note horn wanted
Post by: coolaride on November 20, 2008, 07:30:23 PM
thanks brett

Quote
It is yours if you want it for $0

good to see what goes around comes around  ;)

not sure if i can make it as yet , might see if a club member could let me know if its the one or not .

pm sent

c-ride  :)


Title: Re: High note horn wanted
Post by: mcl1959 on November 20, 2008, 10:00:39 PM
The h-note horn can be identified in 3 ways - It is opposite in shape to the Low note (the bracket is as well). It has a H on it around the rim and the wires come out of a hole in the back - they do not screw on like the Low note. The wires are about 500 mm long with ends which go under the screws on the low note horn. There is no relay like there is in the EK.

Ken