FE-FC Holden Discussion Forum

Technical Board => Restoration Help => Topic started by: freddyc on October 22, 2008, 08:52:05 PM



Title: limited slip diff
Post by: freddyc on October 22, 2008, 08:52:05 PM
will a limited slip centre fit straight into existing housing and axles etc, regards fred


Title: Re: limited slip diff
Post by: mcl1959 on October 22, 2008, 09:35:56 PM
Yes - however you will need to replace one short .stud with a long stud. I mkade a longer stud by welding a longer thread onto an existing stud.

Ken


Title: Re: limited slip diff
Post by: tuffute on October 22, 2008, 09:58:58 PM
yes as ken said it will it,but u only  change the bolts he is referring to if u put a 2.78 or 3.08 centre in where a different ratio was,as the bottom two bolts are longer on the above ratios