FE-FC Holden Discussion Forum

Technical Board => Modification Help => Topic started by: FATBOY on June 02, 2008, 08:48:58 PM



Title: t 700 to red motor
Post by: FATBOY on June 02, 2008, 08:48:58 PM
Whats involved with this conversion are the bell housing expensive
regards fatboy


Title: Re: t 700 to red motor
Post by: FC427 on June 02, 2008, 09:10:55 PM
Hi Fatboy  There was a complet article on fitting a T700 to a EK Ute April 2004 $341 for the V6 and $275 for the V8 T700 for the adapter plate[ not bellhousing] but this was back when the article was written and after Rod sold CRS prices had a large increase ......FC427.......


Title: Re: t 700 to red motor
Post by: FATBOY on June 02, 2008, 09:16:03 PM
You just jogged my memory my mate in sydney Flash autos did the conversion.Im looking at putting a 179 and 4 speed auto in my fc vannette i picked up on good friday .My plumber wants me to build the car up for him.Column auto .Just got to find a ah aj auto column now
regards fatboy


Title: Re: t 700 to red motor
Post by: FC427 on June 02, 2008, 09:24:36 PM
Fatboy sounds good shouldn't be to hard to modify the gate for the 4speed auto on the tree ....FC427......


Title: Re: t 700 to red motor
Post by: FATBOY on June 02, 2008, 09:27:04 PM
rods racks do a collasible conversion using a cable
regards fat