|
Title: What is a good distributor for a 308 Post by: fc_clint_nz on April 02, 2008, 06:32:06 PM I have been looking at these pro comp hei dizzys but then looked at a compact one not really sure what i should use. Any ideas or advice from you guys would be great. Cheers Clint.
Title: Re: What is a good distributor for a 308 Post by: NO NAME on April 02, 2008, 07:14:14 PM pro comp kinda has a bad name.
Title: Re: What is a good distributor for a 308 Post by: smithy on April 02, 2008, 07:16:33 PM hi clint, i was looking at some procomp coils a while ago and asked same question here. might pay to do some research on these .
this is some of the responses i got http://fefcholden.org.au/forum/index.php/topic,12709.0.html similar sort of reponses on other forums i checked out aswell. in the end it basically came down to you get what you pay for! hope this helps in some way cheers dean Title: Re: What is a good distributor for a 308 Post by: Revhead_Fc on April 02, 2008, 11:30:05 PM Hi Clint Mate if you can i would try and source an electronic one from a VK commodore i think VH's had them too you cant go wrong with a factory electronic unit unless its going into a highly modified motor then i would look into brands such as mallory or i think even msd do 308 dizzys now i put a procomp dizzy setup in my torana a few years ago and had nothing but dramas
Hope this helps Ben Title: Re: What is a good distributor for a 308 Post by: fc_clint_nz on April 03, 2008, 05:57:18 PM Thanks guys for the good advice, i think i will spend the extra $$ and get a good brand, those pro comps seem to be popping up all over the place and they are cheap so i guess you get what you pay for. Cheers Clint
|