|
Title: Engine bay paint lines Post by: EffCee on March 31, 2008, 05:10:06 PM Hi,
I was wondering if anyone is able to tell me where the engine bay paint lines finish on a 3rd series FC. The car that I have is a second series FC that has the same colour engine bay as the rest of the car. I wish to paint the car in the colours of the third series, that is with the black engine bay. Can anyone tell me where to mask off, ie I would think that the top of the engine bay paint finishes where the cowl joins but where does it stop underneath? How far does it extend towards the doors? Does the outside of the subframe, match the rest of the body colour? What is the correct paint for underneath. Were the under bodies painted black, or the same colour as the outside of the car. I realise that the restoration won't be perfect as in the original colours and paint scheme, but I do wish to have it as close to perfect as I possible can. I also understand that the gloss level of the engine bay is about 70%. Is there a special mix for this? Or a special colour? Thanks in advance Keith Title: Re: Engine bay paint lines Post by: mcl1959 on March 31, 2008, 08:46:23 PM I need to look at a few more photos, but some cars have the black finishing at the cowl join, whilst others are black up to underneath the bonnet lacing rubber.
The paint goes right through under the body and covers everything underneath. It is called chassis black, which is a semi gloss finish. The entire subframe is finished in the same paint. Ken Title: Re: Engine bay paint lines Post by: KFH on April 01, 2008, 09:06:59 PM Keith
Here is a couple of photos of my original late 59 I am restoring. I hope this answers your question. Keith (http://i31.tinypic.com/2n18g35.jpg) (http://i30.tinypic.com/25g6rk5.jpg) Title: Re: Engine bay paint lines Post by: EffCee on April 02, 2008, 08:10:53 PM Hi Keith,
Thankyou for posting the photo's of your car on the forum. I am able to see where the painting the engine bay starts, across the top of the cowl at the seam and as Ken has previously said, that the chassis black extends all the way underneath. Would you mind posting a picture of the front A pillar so that I can see where the paint lines finish in the door area.Thanks in advance Regards Keith Title: Re: Engine bay paint lines Post by: KFH on April 02, 2008, 09:52:38 PM Hi Keith
I trust this is the area you wish to see. The black finishes below the fold at the inner part of the guard. At present the dirt line is shown but this is body colour. In the case of my car there is quite a lot of body over spray in the wheel arch area. I am not going to duplicate this but will leave the factory markings there. Keith (http://i32.tinypic.com/2ec0ylw.jpg) Title: Re: Engine bay paint lines Post by: TTV6FC on July 31, 2009, 07:46:13 PM Hi all.I have just got all my front end and sub frame components back from the sand blaster and need a few questions answered.The car is a late 59 FC and is a genuine all black 4-846 sedan.Does anyone know if the firewall is likely to have been painted Gloss black like the rest of the car or a satin or semigloss colour like most engine bays.What about the front subframe,Gloss or satin/semigloss.I think it will look nicer if it is all gloss black as is will match a lot better but curious about the originality aspect.Cheers,Jamie.
Title: Re: Engine bay paint lines Post by: mcl1959 on July 31, 2009, 10:17:55 PM Unfortunately it is semigloss - not gloss
Ken |