FE-FC Holden Discussion Forum

Technical Board => Modification Help => Topic started by: I958GM on March 14, 2008, 11:37:58 AM



Title: Tripple SU carbs
Post by: I958GM on March 14, 2008, 11:37:58 AM
I'm fitting a red motor to my FC and l would like to know if triple su's fit and is there any mods to be done to fit them. Also chasing a HR disc front end and four speed gear box (all aussie) cross member to suit the FC. Thanks for any help-Mark


Title: Re: Tripple SU carbs
Post by: weddo on March 14, 2008, 06:11:48 PM
Hey Mark,
I run tripple SU's on my grey motor and had to massage the firewall to clear the last carby and filter
you may have to do the same

regards

Weddo


Title: Re: Tripple SU carbs
Post by: FC427 on March 14, 2008, 06:43:39 PM
I think all triples need a little fire wall modification but the LYNX manifold from memory the outer carbys were steped in towards the center a bit so this helps clearance, even though some modification may still be required on the firewall.Weddo I am sure there will be heaps of shots of triples on FE FC posted after the Nationals .......FC427.......


Title: Re: Tripple SU carbs
Post by: I958GM on March 14, 2008, 07:29:24 PM
Thanks for your help fellas, any other info would be appreciated-Thanks-Mark