|
Title: Deep dish wheels Post by: brett_f on February 28, 2008, 04:04:14 PM Hi gang, need some help! Thinking of putting on some deep dish mags in which the overall length of a standard diff is 4" inches to wide. Is there a diff that will take 13 inch wheels and is 4 inches shorter that will fit up? its holden pattern (of course) or does any one know what the cost would be to get the diff and axels shortened(Melbourne-Vic). Thanks for any help
Title: Re: Deep dish wheels Post by: 2door350 on February 28, 2008, 06:26:02 PM You can try LJ torana...cant remember off hand how much shorter it is but i think it gives you a few inches...
Title: Re: Deep dish wheels Post by: brett_f on February 28, 2008, 07:49:29 PM You can try LJ torana...cant remember off hand how much shorter it is but i think it gives you a few inches... Thanks for the help!!Title: Re: Deep dish wheels Post by: waynos on February 28, 2008, 07:55:32 PM track on lj is 50.8 inches,gives ya what ya need,almost 4 3/4 shorter as long as it wont foul chassis
Title: Re: Deep dish wheels Post by: brett_f on February 28, 2008, 08:14:14 PM track on lj is 50.8 inches,gives ya what ya need,almost 4 3/4 shorter as long as it wont foul chassis Thanks guys for your help, l thought the torana housing might be the go.Title: Re: Deep dish wheels Post by: mcl1959 on February 28, 2008, 08:18:03 PM I have a Torana housing here with axles - It has had FC mounts welded in and the trailing arms removed - it is all set up to mount into FE FC. Asking price is $150
Ken Title: Re: Deep dish wheels Post by: brett_f on February 28, 2008, 08:36:13 PM I have a Torana housing here with axles - It has had FC mounts welded in and the trailing arms removed - it is all set up to mount into FE FC. Asking price is $150 Where abouts are you Ken,and what sort of wheels were you running-Width-offset from centre? Sounds like i'll take it thanksKen Title: Re: Deep dish wheels Post by: mcl1959 on February 28, 2008, 08:57:09 PM I'm in Hoppers Crossing. I was planning on running 7 inch wide rims on my FE with the diff but not going to get around to it.
Ken |