|
Title: Hydra-matic damper plate to flywheel bolts Post by: zulu on February 17, 2008, 02:08:40 PM G'day all, Just about to bolt the Hydra-matic damper plate to the flywheel, book says 13 -15 lb ft for the 6 bolts.
Just wondering if anyone on here has done this as I am not sure if I require lock washers under these bolts? There is no evidence of lock washers having been used previously. Ta, Gary Title: Re: Hydra-matic damper plate to flywheel bolts Post by: Damo58 on February 17, 2008, 08:21:52 PM G'day zulu you wont need any washes mate if you are a bit worried just put a little locktite on each bolt and they wont come undone
Cheers Damo58 |