|
Title: accelerator cable Post by: morry on February 18, 2007, 01:34:10 AM what accelerator cable do i use on an fc with a holden red 6 cyl with twin carbies.
Title: Re: accelerator cable Post by: Glenn 'Stinky' Stankevicius on February 18, 2007, 07:33:54 AM I think Rares have a conversion kit, many people here have made their own usually from Commodore setups. I have seen a conversion done with an L300(?) cable using the original accel pedal too.
Title: Re: accelerator cable Post by: fccool59 on February 18, 2007, 07:39:43 AM if you are using a commodore pedal you might need a v8 commodore
cable for extra length. Title: Re: accelerator cable Post by: NES304 on February 21, 2007, 11:26:59 PM rares have one that was a b**** to work out as the description was not very clear but i'll have some pics up soon.
Title: Re: accelerator cable Post by: NES304 on February 27, 2007, 10:12:49 AM new accellerator cable was installed and you can see here the cable is mounted via a bracket on the base of the carby, the cable pulls the brass lever which is attatched to the front side of the carby butterfly shaft. The cable runs through the bottom hinge bolt in the last photo
(http://i15.tinypic.com/4cvlaow.jpg) (http://i17.tinypic.com/47ds8wg.jpg) (http://i18.tinypic.com/2q3dxfr.jpg) |